Abstract:The structural asphalt and free asphalt can affect the macroscopic mechanical properties of asphalt mastic. Hence, TPU modified asphalt mastic can be regard as a two‐phase composite material composed of TPU modified asphalt and filler. Its rheological characteristics and internal mechanism are affected by TPU modified asphalt and different kind of fillers. Thermoplastic polyurethane (TPU) elastomer modified asphalt mastic is regarded as a two‐phase composite composed of TPU modified asphalt and filler according to the micro‐mechanics theory of composites, and its rheological properties are affected by various types of asphalt, mineral filler, and dosage. In this study, different kinds of fillers (limestone, granite, fly‐ash, coal gangue) and TPU modified asphalt (grade of base asphalt labeled as 90# and polyether‐based TPU modified asphalt with Ch = 40, r = 1.05 through a self‐determined laboratory process) were prepared into asphalt mastic. The dynamic shear rheology and bending beam rheology (BBR) were used to test and evaluate the high and low temperature rheological properties of TPU modified asphalt mastic with different kinds of fillers. The scanning electron microscopy, atomic force microscopy, Brunauer, Emmett, and Teller method, X‐ray diffraction, Fourier transform infrared spectroscopy, and other tests were used to analyze the interaction mechanism between fillers and TPU modified asphalt. The results indicated that the enhancement coefficients λ ̄H and λ ̄L of different fillers are obtained based on the |G*| and S master curve, and the optimum ratio range in TPU modified asphalt with different kinds of fillers are from 1.04 to 1.41. The interaction parameters Luis Ibrarra‐A (A‐values) and Palierne‐C (C‐values) were obviously better than K. Ziegel‐B (B‐values) and Complex shear modulus coefficient (ΔG* ‐values). The surface of coal gangue was rough and emerged micro‐void, the BET specific surface area reached 2.681 m2/g, which was the largest than the other fillers, and the interaction with TPU modified asphalt was the strongest due to the C‐value is 1.562. The chemical composition of coal gangue played an important role in the interaction with asphalt. Physical adsorption is the main mechanism between TPU modified asphalt and fillers. The absorption peak of the original TPU modified asphalt disappeared at 3343 cm−1, and more CaO and Al2O3 in coal gangue are helpful to improve the interaction ability with TPU modified asphalt. There is a significant correlation between the number and area ratio of "bee‐like structure" in TPU modified asphalt mastic and interaction coefficient C‐values.

Study on Compatibility Mechanism of Plasticizer and Asphalt Based on Molecular Dynamics

Experimental studies and molecular dynamics simulation of the compatibility between thermoplastic polyurethane elastomer (TPU) and asphalt

Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures

Molecular simulation on compatibility and mechanisms of SBS and PTW polymer modifiers in asphalt binder

Investigation of Polymer-Asphalt Compatibility Using Molecular Dynamics Simulation

Evaluation of the compatibility between rubber and asphalt based on molecular dynamics simulation

Interaction Mechanism Characterized by Bond Performance and Diffusion Performance between TiO2@LDO and Asphalt Based on Molecular Dynamics Simulation

Evaluation of Compatibilizers for Improving Compatibility between Waste Vegetable Oil and Aged Asphalt

Study of the Microscopic Mechanism of Natural Rubber (Cis-1, 4-Polyisoprene, NR)/Polyethylene (PE) Modified Asphalt from the Perspective of Simulation

Investigation of the effects of chemical modification and oxidative aging on the properties and compatibility of rubber asphalt based on thermodynamic principles

Molecular dynamics study on improvement effect of polyethylene terephthalate on adhesive properties of asphalt and cement-based composite interface

Insight into the diffusion behaviors of SBS‐compatibilizer‐coupled modified asphalt: Molecular dynamics simulation and experimental validation

Study on the diffusion behaviour of styrene-butadiene rubber modifier and asphalt components based on molecular dynamics simulation

Study on the Compatibility of SBR and Asphalt Base Based on Molecular Simulation

Impacts of asphalt and mineral types on interfacial behaviors: A molecular dynamics study

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Mechanistic Study on the Optimization of Asphalt-Based Material Properties by Physicochemical Interaction and Synergistic Modification of Molecular Structure

Revealing compatibility mechanism of nanosilica in asphalt through molecular dynamics simulation

Evaluation and mechanism of interaction effect between thermoplastic polyurethane elastomer modified asphalt and fillers

Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics

Role of Aliphatic Chain Characteristics on the Anti-Cracking Properties of Polymer-Modified Asphalt at Low Temperatures