Abstract:Many scholars have focused on the workability and mechanical properties of fly ash (FA)- ground granulated blast furnace slag (GGBS) geopolymer. To enhance the compressive strength of geopolymer, zeolite powder was added in the present study. A series of experiments were carried out to investigate the effect of using zeolite powder as an external admixture on the per-formance of FA-GGBS geopolymer, 17 sets of experiments were designed and tested to deter-mine the unconfined compressive strength based on the response surface methodology, and then, the optimal parameters were obtained via modeling of 3 factors (zeolite powder dosage, alkali exciter dosage, and alkali exciter modulus) and 2 levels of compressive strength (3 d and 28 d). The experimental results showed that the strength of the geopolymer was the highest when the three factors were 13.3%, 40.3%, and 1.2. Finally, a combination of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and 29Si nuclear magnetic resonance (NMR) analysis was used to conduct micromechanical analysis and explain the reaction mechanism from a microscopic perspective. The SEM and XRD analysis revealed that the microstructure of the geopolymer was the densest when the zeolite powder was doped at 13.3%, and the strength increased accordingly. The NMR and Fourier transform infrared spectroscopy analyses revealed that the absorption peak wave number band shifted toward the lower wave number band under the optimal ratio, and the silica-oxygen bond was replaced by an aluminum-oxygen bond, which generated more aluminosilicate structures.

Optimization of Pelleting Parameters for Producing Composite Pellets Using Zeolitic Material From Fly Ash

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Performance Optimization of FA-GGBS Geopolymer Based on Response Surface Methodology

Process Optimization of Pellet Manufacturing from Mixed Materials in Ultrasonic Vibration-Assisted Pelleting

Preparation and Properties of Agricultural Residuals-Iron Concentrate Pellets

Experiment research on utilization of particle biomass fuel in sintering process

A review on the industrial solid waste application in pelletizing additives: Composition, mechanism and process characteristics

Production of zeolitic materials in pilot scale based on coal ash for phosphate and potassium adsorption in order to obtain fertilizer

Pellet production from furfural residue and sawdust: Evaluating the characteristics and quality of pellets and their dependency on process parameters

Mechanochemically Assisted Coal Fly Ash Conversion into Zeolite

Optimization design and mechanical properties of multi-component ecological gelling materials

Reducing bentonite usage in iron ore pelletization through a novel polymer-type binder: Impact on pellet induration and metallurgical properties

Preparation and properties of zeolite-fly ash-slag composite porous materials: CO2 adsorption performance and mechanical property

Effect of three different binders and pellet feed on granulation behaviour of sintering mixtures

A Review on the Effect of the Mechanism of Organic Polymers on Pellet Properties for Iron Ore Beneficiation

Research on Dezincification of Ironmaking and Steelmaking Ashes

Exploring a new path of green and efficient utilization of sinter return fine to produce composite pellets

Influencing factors and evaluation system for Carbon–Calcium pellet performance in a pyrolysis furnace

Effect of in-situ torrefaction and densification on the properties of pellets from rice husk and rice straw

Microwave Irradiation-Assisted Synthesis of Zeolites from Coal Fly Ash: An Optimization Study for a Sustainable and Efficient Production Process

Pelletization of a Low-Grade Indian Chromite Overburden: Optimizing the Induration Parameters and Understanding the Consolidation Behavior