Abstract:Network structured (TiBw+(TiZr)5Si3)/TA15 composites were successfully fabricated using powder metallurgy. This addresses the need in the aerospace and national defense fields for structural materials that are light-weight, heat-resistant, high-strength, and tough. The results showed that in-situ synthesized TiB whisker (TiBw) reinforcement was distributed around TA15 titanium alloy particles, forming a microstructure network. The titanium-zirconium-silicide (TiZr)5Si3 reinforcement was mainly distributed near the α/β phase interface. By improving the grain and phase boundary strengthening effects, solving the high-temperature weakening effects of the grain and phase boundary, and effectively inhibiting the growth of titanium alloy grains and α phase particles, the strength and ductility of the (TiBw+(TiZr)5Si3)/TA15 composites were significantly improved when compared the as-sintered TA15 titanium alloy (at room temperature and high temperatures). The tensile strength at 600oC was increased by 50% and the fracture strain by 58% when compared to TA15 titanium alloy. Furthermore, the high-temperature strength and ductility of the composites can be substantially improved by solid solution and aging heat treatments. This can modify the morphologies of TA15 matrix and (TiZr)5Si3 reinforcement. After a solid solution and aging heat treatment of 1100oC / 40 min /WQ+ 600oC / 5 h /AC), a tensile strength of 1010 MPa at 600oC, and a fracture strain of 38.5% at 700oC were achieved for the network structured (TiBw+(TiZr)5Si3)/TA15 composites. The strength enhancement after heat treatment is mainly attributed to the formation of the transformation β microstructure, solution strengthening, and dispersion strengthening caused by aging precipitation in the second phase. The improvement of high-temperature ductility is mainly due to the microstructure refinement and the coordinated deformation improvement.

The effect of reinforcement with a titanium carbide high-dispersity phase and subsequent heat treatment on the structure and properties of the AMg6 alloy

The study of the effect of heat treatment on the properties of the AMg2–10%TiC and AMg6–10%TiC composite materials produced by self-propagating high-temperature synthesis

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect of (α + Β) Heat Treatment on Microstructure and Mechanical Properties of (tib + TiC)/Ti–B20 Matrix Composite

Effect of Heat Treatment on the Microstructure and Properties of Ti3AlC2-Cr2AlC-TiC Composite

Effect of the Addition of Cu and Al on the Microstructure, Phase Composition and Properties of a Ti-6Al-4V Alloy Obtained by Selective Laser Melting

Enhanced Resistance of Ti6Al4V Alloy to High-Temperature Oxidation and Corrosion by Forming Alumina Composite Coating

Effect of Heat Treatment Processes on the Microstructure and Mechanical Properties of High-Strength Aluminum Alloy Deposited Layers Processed by Fused Arc Additive Manufacturing

Combined Effect of Particle Reinforcement and T6 Heat Treatment on the Compressive Deformation Behavior of an A357 Aluminum Alloy at Room Temperature and at 350 °C

Effect of γ'-δ precipitates tailored by Ti3AlC2 on Inconel 718 composites: Microstructure evolution, enhanced properties and strengthening mechanism

The effect of heat treatment on corrosion behavior of selective laser melted Ti-5Al-5Mo-5V-3Cr-1Zr alloy

Effect of TiC Content on Microstructure and Mechanical Properties of High-temperature Titanium Matrix Composites

High-temperature cyclic oxidation kinetics and microstructural transition mechanisms of Ti-6Al-4V composites reinforced with hybrid (TiC+TiB) networks

Effect of Rare-earth Element Addition on Structure of Heat-resistant Ti–6.5Al–4Zr–2.5Sn–2.4V–1Nb–0.5Mo–0.2Si Titanium Alloy

Effect of Precipitation Heat Treatment on a Mechanically Alloyed Al‐Based Composite Reinforced with Metallic Glassy Powder

Structure and Phase Composition of SHS Products in Powder Mixtures of Titanium, Carbon, and Aluminum

Effect of Heat Treatment on Microstructure and Mechanical Properties of a Selective Laser Melting Processed Ni-Based Superalloy GTD222

Powder metallurgy fabrication and heat treatment modification of (TiBw+(TiZr)5Si3)/TA15 composites

Effect of a High-Temperature Treatment on Structural-Phase State and Mechanical Properties of IMC of the Ti-25Al-25Nb at.% System

Effect of Heat Treatment on the Microstructure and Tensile Properties of As-forged 2.5%(TiB+TiC)/Ti Composite

Enhanced High Temperature Mechanical Properties and Heat Resistance of an Al–Cu–Mg–Fe–Ni Matrix Composite Reinforced with In-Situ TiB 2 Particles