Abstract:High level aerodynamic performance has been always expected for the axial flow compressors, and it is the consistent goal for axial flow compressor research. To achieve such a goal, the incorporation of CFD with optimization algorithm and surrogate model in blade geometry optimization has become a common practice and been used extensively. But the conventional surrogate model based on merely initial sampling often deviates from the real optimization problem during optimization process and then brings the optimizer to search locally, leading to the compromised optimal results. There are yet much to do to improve such optimization design method. An optimization method of surrogate model being updated by sequential sampling strategy is developed to achieve global optimal design geometry and permit high-level of aerodynamic performance for axial flow compressor. Preliminary Kriging surrogate model is constructed with a small number of selected DOE samplings, where the multiple optimization objective functions are obtained based on CFD simulations. The optimization is performed on the surrogate model with NSGA-II optimization algorithm and Pareto fronts successively obtained. To improve the surrogate model, the MSE (Mean Squared Error) criteria is used to select the refinement point from the newest Pareto front, and it is used to update and improve the surrogate model gradually during the optimization. Such adaptive feature of the surrogate model has enabled the optimizer to search globally. The method is used to optimize transonic Rotor 37 at design flow rate, where the blade shape is varied simultaneously in terms of sweep and lean, and the geometry is optimized. In the converged Pareto front, abundant candidate designs with significant performance gains are produced. Three points over the Pareto front are selected and analyzed to take an insight into the optimization effectiveness. Overall performance curves of optimized geometries are predicted over the entire flow range and they are significantly improved compared with the original ones. Significant overall performance gains arising from the blade optimization are supported by the improved flow behavior. The overall pressure ratio or efficiency gains of the optimized blades are attributed to the significant improvement in the radial distribution of aerodynamic parameters. Further research shows that the shock structure is changed and separation zone is reduced with the optimized blades, which are the major reasons for the improvement of the aerodynamic performance of optimized blades.

Optimal Design of Torque Converter Blade Angle Based on Surrogate Model Method

Multi-objective optimization design for the blade angles of hydraulic torque converter with adjustable pump

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

The Blade Shape Optimization of a Low-Pressure Axial Fan Using the Surrogate-Based Multi-Objective Optimization Method

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Multi-objective optimization of the cascade parameters of a torque converter based on CFD and a genetic algorithm

Development and validation of a CFD based optimization procedure for the design of torque converter cascade

Optimization of the Impeller Geometry for an Automotive Torque Converter Using Response Surface Methodology and Desirability Function

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Numerical Simulation of Torque Converter With Different Pump Blade Camber

Kriging-assisted design optimization of the impeller geometry for an automotive torque converter

Effect of the blade shaped by Joukowsky airfoil transformation on the characteristics of the torque converter

Performance improvement and flow field investigation in hydraulic torque converter based on a new design of segmented blades

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Parametric Analysis of the Effects of Blade Exit Angle on the Cavitation Characteristics in a Hydraulic Torque Converter

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Optimal Matching Method of Structural Parameters of Hydro-mechanical Transmission Device

THREE-DIMENSIONAL BLADE SHAPE OPTIMIZATION FOR A TRANSONIC AXIAL FLOW COMPRESSOR THROUGH INCORPORATING SURROGATE MODEL AND SEQUENTIAL SAMPLING

Axial flow compressor blade optimization through flexible shape tuning by means of cooperative co-evolution algorithm and adaptive surrogate model