Abstract:In order to avoid the production of sulfates and nitrates in marine diesel engines that burn sulfur-containing fuels, the operating temperature of their high-pressure selective catalytic reduction (HP-SCR) systems should be higher than 320 °C. For marine low-speed diesel engines, only the pre-turbine exhaust gas temperature can meet this requirement under specific conditions, with the main engine modulation method helping to increase the exhaust gas temperature. However, the main engine modulation method brings down the power output and fuel economy of the main engine and causes the matching problem of the turbine and the other devices with the main engine. The original engine model of the marine low-speed diesel engine and the high-pressure SCR system configuration model have been constructed using one-dimensional simulation software. In addition, the performance of the high-pressure SCR system under the conditions of low-sulfur and high-sulfur exhaust gas was thoroughly analyzed. Moreover, the two main engine modulation schemes of the scavenging bypass and the turbine exhaust bypass of the original engine matching with the high-pressure SCR system were studied. The study found that the weighted average value of the NOx under the condition of low-sulfur exhaust gas met with the requirement of the IMO Tier III regulations when the low-speed diesel engine was matched with the high-pressure SCR system. However, the weighted average value of the NOx under the condition of high-sulfur exhaust gas was slightly higher than that required by the IMO Tier III regulation. In addition, the optimal main engine modulation scheme for this low-speed diesel engine was clarified by comparing the effects of the scavenging bypass and the turbine exhaust bypass modulation on the exhaust performance, and the working performance of the original engine. With an opening of 0.4 of the CBV valve under 25% engine load, the weighted average NOx of the original exhaust gas was 3.38 g/(kW·h), the power had decreased by 0.7%, and the fuel consumption had increased by 1.0%. Furthermore, when the EGB valve opening was 0.3, the weighted average value of NOx was 3.31 g/(kW·h), the power had reduced by 2.4% and the fuel consumption had increased by 2.5%. Both modulation scheme methods made the exhaust performance of the original engine meet the requirements of the IMO Tier III emission regulations, but the scavenging bypass modulation scheme had less impact on the original engine’s performance.

Experimental investigation of the high-pressure SCR reactor impact on a marine two-stroke diesel engine

Performance Optimization of High-pressure SCR System in a Marine Diesel. Part II: Catalytic Reduction and Process

Combustion and emission characteristics for a marine low-speed diesel engine with high-pressure SCR system

Numerical Investigation of the High Pressure Selective Catalytic Reduction System Impact on Marine Two-Stroke Diesel Engines

Performance Optimization of High-Pressure SCR System in a Marine Diesel Engine. Part I: Flow Optimization and Analysis

Application and Development of Selective Catalytic Reduction Technology for Marine Low-Speed Diesel Engine: Trade-Off among High Sulfur Fuel, High Thermal Efficiency, and Low Pollution Emission

Simulation study on transient performance of a marine engine matched with high-pressure SCR system

Numerical and Thermodynamic Study on Effects of High and Low Pressure Exhaust Gas Recirculation on Turbocharged Marine Low-Speed Engine

Fuel Consumption and Emission Reduction for Non-Road Diesel Engines with Electrically Heated Catalysts

Effects of high-pressure and donor-cylinder exhaust gas recirculation on fuel economy and emissions of marine diesel engines

Numerical Investigation of Two-Stroke Marine Diesel Engine Emissions Using Exhaust Gas Recirculation at Different Injection Time

Combined removal experiment of NOx, SO2 and PM from marine diesel exhaust gas with SCR-DryEGCS system

Research of NOx Reduction on a Low-Speed Two-Stroke Marine Diesel Engine by Using EGR (exhaust Gas Recirculation)–cb (cylinder Bypass) and EGB (exhaust Gas Bypass)

Investigation of EGR with EGB (exhaust Gas Bypass) on Low Speed Marine Diesel Engine Performance and Emission Characteristics

Reduction of the harmful NOx pollutants emitted from the ship engines using high-pressure selective catalytic reduction system

Effects of Exhaust Gas Recirculation on Combustion and Emission of a Marine Diesel Engine

Design and Implementation of Marine Diesel Engine Exhaust Emission Reduction Intelligent Control System

Numerical Research of the Injected Exhaust Gas Recirculation Strategy on a Two-Stroke Low-Speed Marine Diesel Engine

Numerical Studies on the Flow Characteristic of the Marine Two-Stroke Engine Integrated with the High-Pressure Exhaust Gas Recirculation System

Effect of a Plasma Burner on NOx Reduction and Catalyst Regeneration in a Marine SCR System

Study on Diesel Engine Selective Catalytic Reduction Performance at Different Atmospheric Pressures Using the Response Surface Method