Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

High-Conductive Multilayer TiOX-Ti3C2TX Electrocatalyst for Longevous Metal-Oxygen Battery under a High Rate

Synergized Multimetal Oxides with Amorphous/Crystalline Heterostructure as Efficient Electrocatalysts for Lithium–Oxygen Batteries

Mildly Oxidized MXene (Ti 3 C 2 , Nb 2 C, and V 2 C) Electrocatalyst via a Generic Strategy Enables Longevous Li–O 2 Battery under a High Rate

Ti3C2T MXene cathode catalyst with efficient decomposition Li2O2 and high-rate cycle stability for Li-O2 batteries

Trioxane-Derived Stable Solid Electrolyte Interphase Enlightens High-Mass-Loading LiNi0.5Co0.2Mn0.3O2/Li Metal Battery

Synergized N and P co-doped Ti3C2Tx mxene enabling high-performance Li-air batteries

Mutually Activated 2D Ti0.87O2/MXene Monolayers Through Electronic Compensation Effect as Highly Efficient Cathode Catalysts of Li–O2 Batteries

2D MXene/MBene Superlattice with Narrow Bandgap as Superior Electrocatalyst for High‐Performance Lithium–Oxygen Battery

Bimetal Organic Framework–Ti3C2Tx MXene with Metalloporphyrin Electrocatalyst for Lithium–Oxygen Batteries

In situ construction of a P-doped TiO2/Ti3C2Tx heterostructure with local site optimization to improve Li-O2 battery performance

Bimetallic MXene with tailored vanadium d-band as highly efficient electrocatalyst for reversible lithium-oxygen battery

Cation-Assisted Formation of Porous TiO2–x Nanoboxes with High Grain Boundary Density As Efficient Electrocatalysts for Lithium–Oxygen Batteries

Polarized nucleation and efficient decomposition of Li2O2 for Ti2C MXene cathode catalyst under a mixed surface condition in lithium-oxygen batteries

Highly-efficient MnO2/carbon Array-Type Catalytic Cathode Enabling Confined Li2O2 Growth for Long-Life Li–O2 Batteries

Construction of two-dimensional bimetal (Fe-Ti) oxide/carbon/MXene architecture from titanium carbide MXene for ultrahigh-rate lithium-ion storage

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

Bifunctional Catalytic Activity Guided by Rich Crystal Defects in Ti 3 C 2 MXene Quantum Dot Clusters for Li–O 2 Batteries

Dual Redox Mediators Assisted Hierarchically Porous Hollow Carbon Shell Cathode for Enhanced Performance Li‐O2 Battery

Utilizing a photocatalysis process to achieve a cathode with low charging overpotential and high cycling durability for a Li-O2 battery.

Long-cycling lithium-oxygen batteries enabled by tailoring Li nucleation and deposition via lithiophilic oxygen vacancy in Vo-TiO2/Ti3C2T composite anodes

Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering