Abstract:Shrinkage deformation of concrete has been one of the difficulties in the process of concrete performance research. Cracking of concrete caused by self-shrinkage and temperature-drop shrinkage has become a common problem in the concrete world, and cracking leads to a decrease in the durability of concrete and even a safety hazard. Mineral admixtures, such as fly ash and mineral powder, are widely used to improve the temperature drop shrinkage of mass concrete; fly ash can reduce the temperature rise of concrete while also reducing the self-shrinkage of concrete, there are different results on the effect of mineral powder on the self-shrinkage of concrete, but the admixture of fly ash will reduce the strength of concrete, and mineral admixtures have an inhibitory effect on the shrinkage compensation effect of MgO expander(MEA). The paper investigates the effect of mineral admixtures on the mechanical and deformation properties of C50 mass concrete with a MgO expander(MEA), aiming to determine the proportion of C50 mass concrete with good anti-cracking properties under working conditions. The experiments investigated the effect of fly ash admixture, mineral powder admixture and MgO expander admixture on the compressive strength and deformation of concrete under simulated working conditions of variable temperature and analyzed the effect of hydration of magnesite in MgO expander and pore structure of cement paste on deformation. The following main conclusions were obtained: 1. When the concrete compounded with mineral admixture was cured under variable temperature conditions, the compounded 30% fly ash and mineral powder decreased by 4.3%, 6.0% and 8.4% at 7d age, and the compounded 40% fly ash and mineral powder decreased by 3.4%, 2.8% and 2.3% at 7d age, respectively. The incorporation of MEA reduced the early compressive strength of concrete; when the total amount of compounding remained unchanged, the early compressive strength of concrete was gradually smaller as the proportion of compounding decreased. 2. The results of concrete deformation showed that when the temperature rose, the concrete expanded rapidly, and when the temperature dropped, the concrete also showed a certain shrinkage, and the deformation of concrete basically reached stability at 18d. 3. The compounding of 30% fly ash and mineral powder As the compounding ratio decreases, the deformation of concrete increases, and the 28d deformation of concrete with a compounding ratio of 2:1 is 280 × 10-6, while the final stable deformation of concrete with a compounding ratio of 2:1 in compounding 40% fly ash and mineral powder is the largest, with a maximum value of 230 × 10-6, respectively. Overall, the concrete with a total compounding of 30% and a compounding ratio of 2:1 has the best shrinkage resistance performance.

Factors that influence deformation properties of heavy concretes containing alkali-activated cements

Study of Linear Deformation Changes in Heavy Concrete Based on Modified Portland Cement

The Effect of Low-Modulus Plastic Fiber on the Physical and Technical Characteristics of Modified Heavy Concretes Based on Polycarboxylates and Microsilica

Effects of Mineral Admixture on Properties of Young Concrete

Crack-Spacing-Based Flexural Capacity of Polymer Cement Mortar-Overlay Reinforced Concrete Beams at High Environmental Temperature

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Tension Stiffening and Cracking Behavior of Axially Loaded Alkali-Activated Concrete

The physical-mechanical behavior and chemical bonding nature of poly-N-vinylpyrrolidone modified cement concrete

Increasing the crack resistance of high-strength self-compacting concrete

Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study

Effect of Mineral Admixtures on the Mechanical and Shrinkage Performance of MgO Concrete

Development of microstructure and hydration processes of concrete composites for structures with high durability

Impact of Laboratory-Accelerated Aging Methods to Study Alkali–Silica Reaction and Reinforcement Corrosion on the Properties of Concrete

Shrinkage mechanisms and shrinkage-mitigating strategies of alkali-activated slag composites: A critical review

INVESTIGATION OF FACTORS INFLUENCING THE EXPANSIVE BEHAVIOUR, COMPRESSIVE STRENGTH AND MODULUS OF RUPTURE OF ALKALI-SILICA REACTIVE CONCRETE USING LABORATORY CONCRETE MIXES

Comparative research: early-age deformation of alkali-activated/cement-based ultra-high performance concrete

MODIFIED COMPOSITE CEMENTS IN THE SYSTEM СаО–Al2O3–SO3–H2O

Comprehensive investigation of the durability and mechanical properties of eco-friendly geopolymer concrete (alkali-activated)

Mechanical Properties and Mesoscopic Numerical Simulation of Local Weakening in High-Performance Concrete after 10 Years of Alkali Solution Immersion

Influence of Restrained Condition on Mechanical Properties, Frost Resistance, and Carbonation Resistance of Expansive Concrete

Deformation capacity of fresh cement pastes