Optimal design of frequency load control system in multi-zone power system using PID-fuzzy controller optimized by bee algorithm

Jianhui Liu

DOI: https://doi.org/10.1007/s41939-023-00143-2

2023-03-02

Abstract:Today, with the increasing expansion of power systems and the emergence of frequency as one of the criteria for measuring the quality of delivered power, the need to control it has become inevitable. The main goal of load frequency control (LFC) is to maintain the frequency at the nominal value and the exchange power at the contractual value. In this field, various control methods have been presented, among which PI and PID controllers are among the most common controllers due to their simplicity and implementability. But with the development and increasing penetration of renewable resources and other resources, the use of these controllers has been associated with uncertainty. In this article, the modeling of a two-zone multi-source frequency load control system with the presence of water sources has been discussed. If the system load increases, increase the inlet to Turin by opening the steam or water valve to prevent the generator speed and frequency from decreasing. Conversely, by reducing the consumption of electrical energy, the amount of steam or flow rate of incoming water should be reduced to prevent the increase in network frequency. Due to the nonlinear nature of the power system, it is appropriate to use the nonlinear method in the system. In this paper, a fuzzy logic-based controller (PID-fuzzy) is used in the load–frequency control loop. To control and stabilize this model, classical proportional-derivative-integral controller as well as proportional-derivative-integral controller is designed and compared based on fuzzy logic. The proportional-derivative-integral controller based on fuzzy logic is able to change the gain coefficients based on the interception error and its rate of change, and it will be more resistant and perform better than the classical proportional-derivative-integral controller. In this study, a modified version of the bee colony algorithm and the ISTSE objective function is used to design the proposed controller. The performance of the proposed controller has been evaluated with 91% load changes in the regions. To test the results obtained from the proposed controller, the PI-fuzzy controller is used separately in the power system. The simulation results in both scenarios indicate that the proposed PID-fuzzy controller performs better than the other controller and its frequency fluctuations are attenuated in the fastest time and with the least amplitude.