Abstract:The mechanical properties of Chinese traditional timber buildings with the type of post-and-lintel construction were studied with experimental and theoretical method. There are mainly two types of mortise-tenon joints in the type of post-and-lintel construction which are the Mantou mortise-tenon joint and the Zhi mortise-tenon joint at the foot of short column respectively. In this article, two scaled Mantou mortise-tenon joint specimens and three scaled Zhi mortise-tenon joint specimens designed according to the actual configurations were tested and analyzed. The failure modes, hysteresis curves, skeleton curves, and in-plane rotational rigidity of these two types of mortise-tenon joints under low cyclic loading were obtained. The results show that the hysteretic curves of the Mantou mortise-tenon joints appear to be Z shape and have obvious pinch effects, but the hysteresis curves of the Zhi mortise-tenon joints at the foot of short column appear to be reverse S shape and are not plump. During the process of the test, these two types of mortise-tenon joints orderly pass through elastic stage, yield stage, and failure stage. Furthermore, with the consideration of the nonlinear contact influence of the mortise-tenon joint and the nonlinear stress-strain behavior of the timber material, the mechanical properties of these two types of mortise-tenon joints were analyzed by ANSYS software. The theoretical results agreed well with the experimental results. The relationship of the elastic in-plane rotational rigidity, elastic out-of-plane rotational rigidity, and elastic torsional rigidity of these two types of mortise-tenon joints were achieved, the ratio of these three dimensional rotation rigidity is about 4.64:1.00:0.78 for the Mantou mortise-tenon joints, and is about 0.97:1.00:0.74 for the Zhi mortise-tenon joints at the foot of short column. The results can provide theoretical base for structural analysis and repair design of the Chinese traditional timber buildings with the type of post-and-lintel construction.

Design Method of Zen-style Bracket Sets Recorded in the Japanese Carpentry Manual Kamakura Zoei Myomoku (Part 2): A Comparative Study with the Chinese Manual Gongcheng Zuofa Zeli – A Secondary Publication

Design Method of Zen-Style Bracket Sets Recorded in the Japanese Carpentry Manual Kamakura Zoei Myomoku (Part 1): A Comparative Study with the Chinese Manual Yingzao Fashi – A Secondary Publication

A study on the dimensional design of brackets of multi-tiered wooden pagodas in East Asia

Analytical Study On Buckling Restrained Braced Composite Frames

EXPERIMENTAL RESEARCH AND CONSTRUCTION OF PREFABRICATED BAMBOO POLE DEMONSTRATION HOUSE

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Mathematics of Carpentry in Historic Japanese Architecture

Analysis of the Force Characteristics of the Chinese Wooden Dou-Gong Brackets in the Ming Dynasty

Working Drawing System of Structural Carpentry in Traditional Construction: Form, Character and Function

Proportions of Wood Members in Japanese Traditional Architecture—A Comparison of the Kiwari-Sho and Measurements of Building Remains

Further Discussion of the Mode of Calculating the Measurements of Large Timbers Used in the Construction of the Daxiong Hall of Fengguo Temple in Yixian,and a Debate with Mr.Wen Yuqing

Circles, Squares, and the Place Where Buddha Lives An Explorative Study on Compositional Proportion of the Main Hall of Foguangsi

Mechanical properties of Dougong bracket in Chinese traditional timber structure under vertical loads: A systematic review

Comparative study of seismic design method for reinforced concrete structures in China and Japan

Dynamic performance of bracket complexes used in traditional timber structures in Japan

Research on Optimum Design of Retaining Piles Structure with Interior Bracing

Traditional Chinese Wood Structure Joints with an Experiment Considering Regional Differences

Research on Mechanical Properties of Main Joints of Chinese Traditional Timber Buildings with the Type of Post-and-Lintel Construction

The Dimensional Design and Early Construction History of the Main Hall at Chongshou Temple in Jincheng

Contributions of Flexible-Arch Configurations in Shimenzi Arch Dam: New Evidence from Field Measurements

Seismic reduction factors for equivalent static design of braced frames: Tao Wang Mikiko Kato