Abstract:Superwettability can affect the performance of oil separation from water during the treatment of oily wastewater. Among various types of materials developed for cleaning oil pollution, foam is a popular choice due to its attractive lightweight properties and adjustable porosities. Foams with superwetting surfaces (superhydrophilic/superoleophobic underwater) are ideal for oil/water separations. In this study, lignin-based polyurethane foams (LPUFs) were synthesized first, and then polydopamine particles were deposited on the surface of the foam by in situ polymerization under weak alkaline conditions to increase its surface roughness. Afterwards, phytic acid was used to modify the foam to achieve surface superhydrophilicity and underwater superoleophobicity. Successful loading of polydopamine (PDA) particles and coating of phytic acid (PA) onto the foam was demonstrated by SEM, EDS, FTIR, XPS, and thermogravimetric analysis measurements. It was shown in the cyclic compression tests that LPUFs had good mechanical properties. Under 75 % compression strain, the maximum stress in the first cycle of LPUF/PDA/PA was 105.92 kPa. After 30 cyclic compression tests, the maximum stress of LPUF/PDA/PA under 75 % compression strain was 105.63 kPa, demonstrating a high mechanical stability. The contact angle of the foam modified by PDA and PA was 0° for water, 166.7° for chloroform, and 158.4° for hexane, which also demonstrated excellent underwater anti-oil adhesion performances. Oil-water separation tests by using PDA and PA modified lignin-based foam with mixtures of water and n -hexane, cyclohexane, toluene, and pump oil indicated a separation efficiency of over 99 % for the types of mixtures tested together with excellent repeatability. In addition, the PDA and PA modified lignin-based foams were able to adsorb 67.1 mg/g of methylene blue, 96.1 mg/g of rhodamine B, and 98.2 mg/g of copper sulfate. The lignin-based foam could completely degrade under weak alkaline conditions after usage. This study highlighted a novel strategy for synthesizing environmentally friendly high-performance adsorbents to efficiently treat polluted wastewater using lignin as a raw material.

Preparation and modification of antibacterial polyurethane foam for oil–water separation

Multifunctional superhydrophilic/underwater superoleophobic lignin-based polyurethane foam for highly efficient oil-water separation and water purification

Magnetic and Hydrophobic Composite Polyurethane Sponge for Oil–Water Separation

One-pot Superhydrophilic Surface Modification of Waste Polyurethane Foams for High-Efficiency Oil/water Separation

Facile Fabrication of Super-Hydrophobic and Super-Oleophilic Ota-PDA-PU Sponge for Efficient Oil/water Separation

Highly efficient oil-water separation and oil adsorption with hydrophobic hydrotalcite/polyurethane porous composite foam

One-step preparation of durable pH-responsive polyurethane foam for oil/water separation

A Facile Method to Fabricate Superoleophilic and Hydrophobic Polyurethane Foam for Oil–water Separation

Reusable, Stable, Efficient and Multifunctional Superhydrophobic and Oleophilic Polyurethane Sponge for Oil–Water Separation Prepared Using Discarded Composite Insulator

Superhydrophobic, Flame-Retardant and Magnetic Polyurethane Sponge for Oil-Water Separation

Recent Advances of Polyurethane Composite Foam Materials in Oil/Water Separation Applications

Mussel-Inspired and In Situ Polymerization-Modified Commercial Sponge for Efficient Crude Oil and Organic Solvent Adsorption

Preparation of biomass carbon/polyurethane foams for selective oil/water absorption

Hydrophobic Modification of Polyurethane Foam for Oil Spill Cleanup.

Superhydrophobic/Superoleophilic Polyurethane /reduced Graphene Oxide/ Sponge for Efficient Oil-Water Separation and Photothermal Remediation

Molecular Understanding and Design of Porous Polyurethane Hydrogels with Ultralow-Oil-Adhesion for Oil–Water Separation

Controllable self-foaming preparation of durable superhydrophobic/superlipophilic polyurethane sponge for efficient oily emulsions separation

Preparation of Magnetic, Superhydrophobic/superoleophilic Polyurethane Sponge: Separation of Oil/water Mixture and Demulsification

Robust Mussel-Inspired LBL Carbon Nanotube-Based Superhydrophobic Polyurethane Sponge for Efficient Oil–water Separation Utilizing Photothermal Effect

Mosquito's Eyes Inspired, Hydrophobic and Multifunctional Coating on Flexible Polyurethane (PU) Foam: Highly Efficient Oil Spills Remediation and Exceptional Flame-Retardant Performance

Environment-Friendly Superhydrophobic Sponge for Highly Efficient Oil/Water Separation and Microplastic Removal