Ultra-Clean Separation of Micro-Particles in Lubricant Oil Based on Short-Flow Control of Mini-Hydrocyclone

Tong Zhang,Jianping Li,Aosong Wei,Junjun Huang,Shihao Li,Jun Huan,Faquan Wang,Hualin Wang
DOI: https://doi.org/10.2139/ssrn.4143331
2022-01-01
SSRN Electronic Journal
Abstract:Continuous online ultra-clean separation of micro-particle contaminants is vital for lubricant oil. Although hydrocyclone is widely used to separate fine particles, it often suffers from short-flow, which makes ultra-clean separation of trace micro-particle contaminants remain challenging. Here, mini-hydrocylones with overflow microchannels based on the active control of short-flow were proposed for ultra-clean separation of micro-particle contaminants in lubricating oil. Φ18 mm mini-hydrocyclones with different microchannel cross-section diameters (1.5,1.25, 1, 0.75 mm) were manufactured by 3D printing technology for online micro-particle number separation experiments under low flow rates. The CFD simulation results show that the overflow microchannels reduce the short-flow by up to 81.3%. When the overflow microchannel to vortex finder diameter ratio is 0.21, the maximum number separation efficiency and mass separation efficiency can reach 99.98% for micro-particles larger than 9.8 μm. The concentration of particles larger than 9.8 μm at the outlet was 0.003 mg/L, which is 1/22 of that at the conventional hydrocyclone outlet; the number of particles was 1/ml, which is 1/30 of that at the conventional hydrocyclone outlet. The cleanliness of the purified oil reached the international standard (ISO-4406) of 17/13/7 grade, and it also showed excellent technical-economic performance.
English Else
What problem does this paper attempt to address?