Abstract:Hexavalent chromium Cr (VI) is a toxic material used in many industries such as tanneries and electroplating industries. Most of the previous researches studied the removal of chromium at lower concentrations up to 600 mg/L but did not tackle the behavior at higher concentrations, which resemble the real concentration of studied tanneries effluents. The present research is a comparative study of different agricultural low cost adsorbents in the removal of high Chromium concentration from industrial wastewater up to 1000 mg/L, compared to a commercial activated carbon. The tested adsorbents are (Banana Waste (BW), Sawdust (SD), Phragmites Australis (PA), Sugarcane Bagasse (SCB), Pea pod peels (PPP) and Rice straw (RS)). The materials were chemically pretreated with acid-alkali except BW was treated with acid only, to improve adsorbent metal binding capacity. Batch experiments were conducted to study the effect of pH, adsorbent dosage, contact time, initial Chromium concentration and temperature on the removal efficiency of Chromium from wastewater. The experiments were conducted in two sets, one for lower concentration (25-50-100-200-400) mg/L and the other for higher concentration (600-800-1000) to simulate the concentration of Chromium in tannery industry effluents. At 1000 mg/L initial concentration, BW achieved the optimum removal efficiency of 73.28% at pH = 3, adsorbent dosage = 25 g/L and contact time of 3 hours with the adsorption capacity was 39 mg/g. For SD at pH=2, 3 hours contact time, 10 g/L dosage, and 30oC the removal ratio was 64.83% and the adsorption capacity was 86.30 mg/g. The equilibrium data for various agricultural adsorbents was being tested with various adsorption isotherm models such as Langmuir, Freundlich and Tempkin. At low concentrations, AC, BW, PA and SCB follows Freundlich isotherm model while SD follows Langmuir isotherm model. At higher concentrations, BW, SD, PA follows Langmuir isotherm while SCB follows Tempkin isotherm model. To evaluate the mechanism of Cr adsorption on different adsorbents, Pseudo-first-order and Pseudo-second-order equations were used. The adsorption process follows Pseudo-second-order for all adsorbents, which confirms the chemisorption of Cr (VI) on different adsorbents.

COMPREHENSIVE STUDY OF CHROMIUM HEAVY METAL ADSORPTION FROM TEXTILE WASTEWATER USING NATURAL COMPOSITE ADSORBENT

Adsorption of High Chromium Concentrations from Industrial Wastewater Using Different Agricultural Residuals

Study on adsorption of hexavalent chromium by composite material prepared from iron-based solid wastes

OPTIMIZING THE REMOVAL EFFICIENCY OF CHROMIUM FROM TANNING PLANT EFFLUENT BY ADSORPTION METHOD WITH ACTIVATED CARBON CHAT STEMS (CATHA EDULIS) USING RESPONSE SURFACE METHODOLOGY

The application of Rumex Abysinicus derived activated carbon/bentonite clay/graphene oxide/iron oxide nanocomposite for removal of chromium from aqueous solution

Chromium removal from tannery wastewater through activated carbon produced from Parthenium hysterophorus weed

Effective chromium removal of metal anchored alginate-chitosan binary bio-composites

Development of a surfactant-assisted lanthanum anchored hydroxyapatite@polyaniline hybrid composite for the elimination of chromium ions from aqueous solution

Amidoxime modification of polyacrylonitrile/Pterocladia capillacea-derived activated carbon composite for adsorption of toxic chromium from aquatic environment

A composite adsorbent of superparamagnetic nanoparticles with sludge biomass derived activated carbon for the removal of chromium (VI)

Separation of Chromium(VI) Metal in Wastewater Using Electrocoagulation Method with NaCl Coagulant

Comparative study for removal of toxic hexavalent chromium by zinc oxide nanoparticles, chitosan, chitin and zinc-chitosan nano-biocomposite

Adsorption of chromium from electroplating wastewater using activated carbon developed from water hyacinth

KINETICS OF ADSORPTION OF HEAVY METALS (IRON) FROM TEXTILE INDUSTRY WASTE USING CALCIUM CARBIDE RESIDUE AS ADSORBENT

Study of the Properties and Mechanism of Deep Reduction and Efficient Adsorption of Cr(VI) by Low-Cost Fe3O4-modified Ceramsite.

Sorption Capacity Measurement of Chlorella Vulgaris and Scenedesmus Acutus to Remove Chromium from Tannery Waste Water

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Experimental Studies on the Removal of Chromium from Tannery Wastewater using Chemical Precipitation and Adsorption Techniques

Fabrication of Adsorbent Using Nano-Sized Lignocellulosic Biochar Coated on Luffa Aegyptiaca Sponge to Remove Heavy Metal Chromium VI

Efficient removal of refractory dyestuffs from textile wastewater by composite hydrated alumina derived from waste aluminum polishing solution

Composite adsorbent of Terminalia catappa fruit shell‐derived activated carbon and chitosan for enhanced removal of chromium(VI): kinetics, thermodynamics, equilibrium and adsorption mechanism