Abstract:Advances in Structural Engineering, Ahead of Print. Steel circular hollow section (CHS) members are widely utilized as axial force-resisting structural members in civil engineering structures. The buckling strength under axial loads is one of the critical parameters to determine the performance of the steel CHS members, which is significantly affected by the discreteness introduced by geometries, material, and initial imperfections. However, the reduction factor employed in the modern design codes (i.e. Chinese codes and EC3) only accounts for the reduction caused by all kinds of discreteness and does not reflect the impacts of every single discreteness and imperfection. To fill the gap, this paper proposed an interpretable machine-learning method to provide the probabilistic axial buckling strength of steel CHS members prediction result in a distribution form with the consideration of detailed discreteness. The model to predict the nominal axial buckling strength of steel CHS members was first developed utilizing ten machine learning algorithms after sufficient numerical simulations, where the numerical model was verified using test results. The artificial neural network (ANN) was selected for developing the prediction model due to its highly reliable performance in testing. The developed ANN models were further interpreted utilizing Shapley Additive exPlanations (SHAP) to determine the interrelationship of different parameters. Then, the probabilistic axial bucking strength prediction model was established based on the developed ANN models, where the Latin hypercube sampling method was applied to address the discreteness of geometries, material, and initial imperfections. The generated probabilistic axial bucking strength prediction model's effectiveness was verified by the evidence that the machine learning prediction results can highly match the numerical results' probability density function and the result from codes while significantly reducing the computation time. Finally, the design parameters' impact on the axial buckling strength's discreteness was evaluated using the global sensitivity analysis (GSA) method. The result shows that the discreteness of design parameters substantially influences the distribution of the axial buckling strength of the steel CHS members and the proposed prediction model can provide an accurate probabilistic distribution prediction.

Exploring Machine Learning for the Stability Analysis of Rotary‐straightened Steel Members with Multiple Stiffness Reduction Models

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Machine Learning-Based Probabilistic Predictions for Concrete Filled Steel Tube (CFST) Column Axial Capacity

Interpretable Machine-Learning Models for Maximum Displacements of RC Beams under Impact Loading Predictions

Residual Stiffness Assuring Stability of Steel Structures

Regression-classification Ensemble Machine Learning Model for Loading Capacity and Bucking Mode Prediction of Cold-Formed Steel Built-Up I-section Columns

Machine learning (ML) based models for predicting the ultimate bending moment resistance of high strength steel welded I-section beam under bending

Intelligent Design of Limit States for Recycled Aggregate Concrete Filled Steel Tubular Columns

Machine learning models for predicting axial compressive capacity of circular CFDST columns

Machine-learning-assisted design of high strength steel I-section columns

Predicting axial load capacity of CFST columns using machine learning

Prediction of Load-Deformation Relations for CFDST Columns Through Machine Learning Methods

Analysis of initially crooked, end restrained steel columns

Design of Cold-Formed Stainless Steel Circular Hollow Section Columns Using Machine Learning Methods

Buckling and ultimate load prediction models for perforated steel beams using machine learning algorithms

Machine learning regression approaches for predicting the ultimate buckling load of variable-stiffness composite cylinders

Machine Learning-Based Flexural Capacity Prediction of Corroded RC Beams with an Efficient and User-Friendly Tool

Interpretable machine learning models for predicting probabilistic axial buckling strength of steel circular hollow section members considering discreteness of geometries and material

An Innovative Machine Learning Model to Formulate the Bearing Capacity of Concrete-Filled Steel Tube Column

A Smeared Stiffener Based Reduced-Order Modelling Method for Buckling Analysis of Isogrid-Stiffened Cylinder

Capacity Prediction of Cold-Formed Stainless Steel Tubular Columns Using Machine Learning Methods