Abstract:During the first years of the last decade, Egypt used to face recurrent electricity cut-offs in summer. In the past few years, the electricity tariff dramatically increased. Radiative cooling to the clear night sky is a renewable energy source that represents a relative solution. The dry desert climate promotes nocturnal radiative cooling applications. This study investigates the potential of nocturnal radiative cooling systems (RCSs) to reduce the energy consumption of the residential building sector in Egypt. The system technology proposed in this work is based on uncovered solar thermal collectors integrated into the building hydronic system. By implementing different control strategies, the same system could be used for both cooling and heating applications. The goal of this paper is to analyze the performance of RCSs in residential buildings in Egypt. The dynamic simulation program TRNSYS was used to simulate the thermal behavior of the system. The relevant issues of Egypt as a case-study are firstly overviewed. Then the paper introduces the work done to develop a building model that represents a typical residential apartment in Egypt. Typical occupancy profiles were developed to define the internal thermal gains. The adopted control strategy to optimize the system operation is presented as well. To fully understand and hence evaluate the operation of the proposed RCS, four simulation cases were considered: 1. a reference case (fully passive), 2. the stand-alone operation of the RCS, 3. ideal heating & cooling operation (fully-active), and 4. the hybrid-operation (when the active cooling system is supported by the proposed RCS). The analysis considered the main three distinct climates in Egypt, represented by the cities of Alexandria, Cairo and Asyut. The hotter and drier weather conditions resulted in a higher cooling potential and larger temperature differences. The simulated cooling power in Asyut was 28.4 W/m² for a 70 m² absorber field. For a smaller field area of 10 m², the cooling power reached 109 W/m² but with humble temperature differences. To meet the rigorous thermal comfort conditions, the proposed sensible RCS cannot fully replace conventional air-conditioning units, especially in humid areas like Alexandria. When working in a hybrid system, a 10% reduction in the active cooling energy demand could be achieved in Asyut to keep the cooling set-point at 24 °C. This percentage reduction was nearly doubled when the thermal comfort set-point was increased by two degrees (26 °C). In a sensitivity analysis, external shading devices as a passive measure as well as the implementation of the Egyptian code for buildings (ECP306/1–2005) were also investigated. The analysis of this study raised other relevant aspects to discuss, e.g. system-sizing, environmental effects, limitations and recommendations.

A methodology towards delivery of net zero carbon building in hot arid climate with reference to low residential buildings — the western desert in Egypt

Performance Investigation Of A Net-Zero Energy Building In Hot Summer And Cold Winter Zone

Life cycle assessment (LCA) based concept design method for potential zero emission residential building

Towards Net-Zero Energy Consumption with Near Net-Zero Initial Cost: A Case Study from Georgia, USA

Design parameters influencing the energy performance and indoor comfort of net zero energy building "NZEB" designed for semi-arid urban areas: Digital workflow methodology, sensitivity analysis and comparative assessment

Methodology for developing economically efficient strategies for net zero energy buildings: A case study of a prototype building in the Yangtze River Delta, China

A simulation-based study to evaluate the cooling potential of nocturnal radiative cooling systems for residential buildings in Egypt

Reuse and Retrofitting Strategies for a Net Zero Carbon Building in Milan: An Analytic Evaluation

Improving Energy Efficiency performance utilizing building envelope design in High standard housing in Egypt

Comprehensive Carbon Emission and Economic Analysis on Nearly Zero-Energy Buildings in Different Regions of China

Passive Building Energy Saving: Building Envelope Retrofitting Measures to Reduce Cooling Requirements for a Residential Building in an Arid Climate

Net zero energy building evaluation, validation and reflection - A successful project application

Multi-objective genetic algorithm optimization model for energy efficiency of residential building envelope under different climatic conditions in Egypt

Improving thermal comfort using biomimicry in the urban residential districts in New Aswan city, Egypt

Emissions from a net-zero building in India: life cycle assessment

Application of synergic evidence-based design and sustainable technology strategies in off-grid residential NZEBs in the severe cold zone of China: A case study of The Steppe Ark

Towards an Adaptation of Efficient Passive Design for Thermal Comfort Buildings

Life Cycle Assessment of Embodied Carbon and Strategies for Decarbonization of a High-Rise Residential Building

Life cycle assessment and generative design: development of a national LCA tool for exterior walls

Moving toward Net Zero Carbon Buildings to Face Global Warming: A Narrative Review

Thermal comfort optimization through bioclimatic design in Mediterranean cities