Abstract:Large-format cells are gaining popularity for battery electric vehicles (BEVs) to maximize volumetric and gravimetric energy densities but are associated with challenges in ensuring adequate thermal management. Spatial current density and temperature variations negatively affect overall cell utilization and lifetime.In addition, the mechanical stresses generated within the silicon-based battery electrodes also cause aging and resultant capacity loss. The coupled effects of the thermal and mechanical factors could thus particularly exacerbate cell capacity degradation. Rigorous mechano-thermo-electrochemical models for battery degradation can be a powerful complementary tool to understand these phenomena better. Simulating performance scenarios can significantly improve cell design and experimentation while reducing time and cost commitments. Model-based design approaches thus have the potential to yield substantial economic benefits. This work shall serve as an extension to the previously developed thermal degradation model for non-uniform aging in lithium-ion batteries by coupling with mechanical models predicting the effects of volume change within the batteries over cycling. The observed capacity fade trend for a given battery is ultimately the result of an interplay between multiple degradation mechanisms, which depend on a range of design and operating parameters. The errors between the model predictions and experimental data can provide information on the suitability of a given model and the relative prevalence of a given degradation mechanism, with functional and practical benefits, as there exists significant variation in the parameters, mechanisms, and predictive capability of models in the literature. In addition, a rigorous model of volume changes increases the accuracy of predictions of dynamic stress-strain profiles, which in turn helps improve predictions of associated mechanical degradation phenomena. As a first step towards including mechanical effects, the current model builds on the previously reported studies for modeling volume change in porous electrodes due to intercalation (deintercalation) during lithiation (delithiation). This volume change leads to dimensional and porosity changes in the porous electrodes. Furthermore, these mechanical models will help predict generated stresses and strain profiles within the battery and will be related to models of resultant degradation, especially in the case of silicon/graphite electrodes characterized by substantial volume changes.

A mathematical model development to investigate the impact of key parameters on the generated voltage hysteresis of silicon anode based lithium half cells

Development of a mathematical model to study the impact of state of charge dependent exchange current density on the generated voltage hysteresis of silicon anode-based lithium half cells

An mechanical/thermal analytical model for prismatic lithium-ion cells with silicon‐carbon electrodes in charge/discharge cycles

Slow Voltage Relaxation of Silicon Nanoparticles with a Chemo-Mechanical Core-Shell Model

Voltage Hysteresis of Silicon Nanoparticles: Chemo-Mechanical Particle-SEI Model

Modeling and Analysis of Coupled Thermal and Mechanical Capacity Degradation in Silicon-Based Lithium-Ion Batteries

A Chemo-Mechanical Model for Fully-Coupled Lithiation Reaction and Stress Generation in Viscoplastic Lithiated Silicon

Modeling Silicon-Dominant Anodes: Parametrization, Discussion, and Validation of a Newman-Type Model

A multiphysics microstructure-resolved model for silicon anode lithium-ion batteries

Modelling Dynamic Limitations of Lithium Transport in Lithium-Sulfur Batteries

Multi-scale analysis of an electrochemical model including coupled diffusion, stress, and nonideal solution in a silicon thin film anode

A Coupled Electro-Chemo-Mechanical Model for Li-ion Batteries: Effect of Stress on the Voltage Hysteresis of Lithium Ion Batteries

Modeling of Coupling Between Free Volume Evolution and Diffusion in Silicon Electrodes of Lithium-Ion Batteries

Parameterization and Validation of an Electrochemical Thermal Model of a Lithium-Ion Battery

A mathematical model for mechanically-induced deterioration of the binder in lithium-ion electrodes

Advanced Lithium-Ion Battery Model for Power System Performance Analysis

An Electrochemistry-Based Impedance Model for Lithium-Ion Batteries

Mathematical Modelling of Semi-Solid Electrodes for Flexible Lithium-Ion Batteries

(Invited) Effect of Temperature on Lithium-Ion Battery Voltage Response and How to Model It in the Mechanistic Modeling Approach

Mathematical Modeling and Experiments of A Half-Cell Redox Flow Lithium Ion Battery System

Development of Multi-Physical Simulation Models for Quasi-Static Load Analysis to Predict the Behavior of Li-Ion and Na-Ion Batteries Under Different Mechanical Abuse Loadings