SECURITY SYSTEM FOR AGRICULTURAL MACHINERY AT RAILWAY CROSSINGS

ELENA GUSAROVA,VALENTIN GUSAROV,VALERY KHARCHENKO,,

DOI: https://doi.org/10.22314/2658-4859-2022-69-3-95-102

2022-01-01

Elektrotekhnologii i elektrooborudovanie v APK

Abstract:It is shown that there are more than 7,000 official unregulated railway crossings in the Russian Federation. A high level hazard of such facilities is especially emphasized. It is noted that the use of automatic traffic control at railway crossings results in a 10-times decrease in the accident rate. (Research purpose) To develop a system of power supply, alarm and blocking to regulate the movement of agricultural machinery at temporary, spontaneous, seasonal and service railway crossings located in decentralized areas. (Materials and methods) It is proposed to use renewable energy sources, solar, wind or hydraulic. The advantages of solar energy are substantiated for the power supply system, signaling and blocking a temporary railway crossing. (Results and discussion) The use of a solar power supply system is proposed, since an average daily output of a solar power plant is 2.0-2.5 times higher compared to a wind power plant of similar capacity. The developed power supply system uses constant voltage of 24 Volts, permitted on the railway infrastructure. An electrical circuit of the control unit for the alarm and blocking system and the algorithm for its operation were developed. To obtain information about a train approaching the crossing, a vibration sensor was created and examined. The reliability of the alarm and blocking system is proved for a 2000-meter electric line. (Conclusions) To regulate crossings, a system of power supply, alarm and blocking was developed for the intersection of automobile and low-intensity railways located in areas remote from centralized electrical networks. For light signaling and blocking of long electric lines, a vibration sensor was made and examined. The sensor transmits a signal about a train passing to the control unit, which operates on a circuit at a vibration velocity of 3.5 millimeters per second. A booster power supply was created and tested for long electric lines, remotely located barrier traffic lights (at a distance of 2 kilometers before the crossing), operating on renewable energy sources.