Abstract:This paper presents a progressive numerical model validation of a bowstring-arch railway bridge based on the analysis of experimental data from different structural response measurements, namely, static deformations under environmental actions, modal vibrations, and transient dynamic responses under traffic loads. This work also addresses an integrated approach that uses structural health monitoring (SHM) measurements in combination with FE modelling to understand the structural behaviour of a long-span complex bridge. A progressively phased in situ SHM system has provided a diverse set of data streams ranging from static and dynamic responses to the measurement of environmental and operational traffic loads. The first phase consists of defining a detailed baseline finite-element (FE) model of the bridge, envisaging the initial condition of the structure immediately after construction, and its validation using modal parameters (natural frequencies and mode shapes) derived from an ambient vibration test. Since overall in-service deflections in general do not exercise the non-linear regime of the bridge response, the second phase focuses on the analysis of static response data and temperature measurements to validate the non-linear behaviour of the structural system, particularly at the bearing devices, under slow actions. The third and final phase addresses the dynamic analysis under traffic actions, which provides greater sensitivity in the detection of non-linear behaviour due to the effects of high-amplitude actions induced by regular train loading profiles. To guarantee the accuracy of the baseline numerical model, particularly under temperature and traffic actions, it was necessary to use contact restrictions in some specific bearing devices. This improvement is in line with the structural changes detected in some bearing devices through visual inspections. As a result, an updated numerical model capable of reproducing the modal, static, and dynamic structural responses was achieved, showing a very good agreement between experimental and numerical data. In future applications, this updated numerical model will be useful for assessing the condition of the bridge under traffic loads, namely to identify damages and support the adoption of life cycle maintenance strategies based on the integration of SHM systems with (stochastic) load and failure models.

Railway Bridge Management System Based on Visual Inspections with Semi-Markov Continuous Time Process

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Linear and nonlinear time-series methodologies for bridge condition assessment: A literature review

Optimum Life-Cycle Maintenance Strategies of Deteriorating Highway Bridges Subject to Seismic Hazard by a Hybrid Markov Decision Process Model

The Model for Predicting the Remaining Service Life of Reinforced Concrete Bridges In-Service and Applicability

Progressive numerical model validation of a bowstring-arch railway bridge based on a structural health monitoring system

Detecting, monitoring and modeling damage within the decision-making process in the context of managing bridges: a review

Railway bridge structural health monitoring and fault detection: State-of-the-art methods and future challenges

Performance and reliability prediction of bridges based on inspection and monitoring data using Bayesian dynamic models *

Bridge Deterioration Modeling by Markov Chain Monte Carlo (MCMC) Simulation Method

A Probabilistic Model for Optimal Bridge Inspection Interval

Weigh-in-motion Implementation in an Old Metallic Railway Bridge

Bridge maintenance management based on routine inspection data: a quantitative approach

Representation of In-Service Performance for Cable-Stayed Railway–Highway Combined Bridges Based on Train-Induced Response’s Sensing Data and Knowledge

Long-term Health Monitoring for Deteriorated Bridge Structures Based on Copula Theory

Innovative hierarchical fatigue analysis of critical riveted railway bridges: A case study

Artificial Intelligence Based Structural Assessment for Regional Short- and Medium-Span Concrete Beam Bridges with Inspection Information

Railroad bridge monitoring using wireless smart sensors

Long-term Bridge Health Monitoring and Performance Assessment Based on a Bayesian Approach

Assessment and prediction of high speed railway bridge long-term deformation based on track geometry inspection big data

An unsupervised machine learning approach for real-time damage detection in bridges