Abstract:The rapid development of highway traffic has gradually deteriorated the acoustic environment along the line. Sonic crystal theory provides new ideas for traffic acoustic barrier. However, the lack of practical numerical models and field test verifications has restricted the promotion and application of sonic crystal acoustic barriers (SCABs). In this study, a field test was conducted to study the noise reduction performance of SCAB. The SCAB exhibits excellent wave attenuation in the band gap, when compared with concrete acoustic barriers (CABs) along highways, the noise reduction performance in the band gap is improved by 0.5-2.1 dB(A), especially at the local peak in the highway noise spectrum. However, from the perspective of total insertion loss, CAB performs better than SCAB in all distances in the protected area. Next, the 3D FEM model is established based on the highway site and validated by the measured results. Compared with the commonly used 2D model, the 3D FEM model is more practical for considering the top diffraction and ground reflection, which influence the noise reduction performance a lot and need to be considered. To improve the noise reduction performance of SCAB, three types of optimization measures are explored. The gradient combination of scatterers can effectively improve the noise reduction effect in the low-frequency band gap, especially the high- to low-gradient layout. Besides, not only the porous sound-absorbing material but also the microperforated plates can improve the noise reduction effect, especially outside the band gap. The larger perforation rates and smaller apertures of microperforated plate are preferred in SCAB. This work provides field test support and promotes the application of SCABs in traffic noise control.

Wave-based numerical investigation on diffraction correction for a low-height barrier in energy-based sound propagation model for road traffic noise

The Computing Model of Noise Iinfluence for Elevated Railway in Urban

Theoretical analysis of low-frequency noise radiated from bridge vibrations

The Calculating Model of Sound Field Distribution along the Urban Elevated Railway

Modeling, analysis, and validation of an active T-shaped noise barrier

Additional noise reduction with diffracting elements on barriers using numerical and standard calculation methods

A FIELD TEST ON A NOISE BARRIER FOR REDUCTION OF WIND LOAD USING A VEHICLE RUNNING AT A CONSTANT SPEED

NUMERICAL MODELLING OF THE SOUND FIELDS IN URBAN STREETS WITH DIFFUSELY REFLECTING BOUNDARIES

Numerical modeling and field test of sonic crystal acoustic barriers

Study of acoustic characteristics of noise barriers

Acoustic performance evaluation of railway boundary walls using a computational fluid dynamics-based simulation approach

Multiple Acoustic Diffraction Around Rigid Parallel Wide Barriers

An Analytical Formulation to Model Geometric and Resonant Scattering of Buried Metabarriers for Traffic-Induced Vibrations Mitigation

Active Control Of The Directivity Of The Sound Diffraction From Barriers

Comparative Study of Noise Reduction Effects of Different Sound Absorption Barriers

Prediction and Analysis of Noise Impact and Noise Reduction Scheme Effect for Complex Road Types

An Integral Equation Method for Calculating Sound Field Diffracted by a Rigid Barrier on an Impedance Ground.

Optimization and Experiment on the Top Form of Urban Elevated Road Noise Barrier

An Analytical Model to Estimate the Performance of an Indoor Barrier at Low-Medium Frequencies

Effect of embankment slope on road traffic noise propagation: numerical investigation and construction of correction formula for difference by slope angle

A Radiosity-Based Model for Simulating Sound Propagation in Urban Streets