Abstract:Red clay is widely distributed globally and is closely related to human production and life. The middle reaches of the Yellow River basin in China are characterized by complex geological structures, concentrated rainfall periods. The soluble salts such as sodium sulfate enter the red clay particles along with the infiltrating water, forming a red clay-like saline soil. In order to study the effects of water and salt on red clay soils, this paper uses red clay in the Heyang of Weinan with different ratios of distilled water (10–20%) and Na 2 SO 4 (0–4%), and obtains the resistivity of red clay soils at different frequencies (100 Hz–100 kHz) using an inductance, capacitance and resistance digital bridge tester. The results show that the resistivity of red clay is negatively correlated with water and salt content. With the increase of water content, the increase of conductive paths in the pore water improved the electrical conductivity of the red clay; while when the concentration of Na 2 SO 4 increased, the free moving anions and cations in the pore water increased, the electrical conduction efficiency increased and the resistivity decreased. The high frequency increased the conductivity of red clay by contributing to electrical double layer deformation, whereas the electrode polarization led to inhibition of conductivity under low frequency. A negative power exponential relationship exists between the resistivity of red clay and the test frequency. This study may provide a valuable reference for the rapid identification of the physical properties of red clay and its internal structure.

Effect of Moisture on Corrosion Behavior of Q235 Steel in Bentonite Clay

Corrosion of Q345B Steel in Soil Solution Extract Containing Chloride Ions

Corrosion Behavior on Carbon Steel in a Simulated Soil Solution under the Interaction Effect of Chloride and Bicarbonate Ions

Soil Environmental Factors on the Corrosive Effects of Carbon Steel Grounding Materials

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Effect of Tempered Martensite and Ferrite/Bainite on Corrosion Behavior of Low Alloy Steel Used for Flexible Pipe Exposed to High-Temperature Brine Environment

Chloride Transport Behavior in Bending-Shear Section of Reinforced Concrete Beam under Combined Effect of Load and Environment

Dynamic Electrochemical Model of Steel Corrosion in Concrete Microenvironment under Multifield Action of Heat-Moisture-Chlorine

Investigation of Q235 steel electrochemical corrosion behavior in naturally dried sandy soil

Characterization of Corrosion Behavior of Irradiated X65 Low Carbon Steel in Aerobic and Unsaturated Gaomiaozi Bentonite

Experimental study on Q235 steel in soil polluted by NaCl after corrosion

Synergistic Effect of Carbamide and Sulfate Reducing Bacteria on Corrosion Behavior of Carbon Steel in Soil

Corrosion Behavior of Q235 Steel in Atmospheres Containing SO2 and NaCl

Electrochemical Corrosion Behavior of Arc Sprayed Zn and Zn15Al Coatings in Simulated Salina Soil and Neutral Meadow Soil Solutions

Effect of Chloride and Bicarbonate Ions on Corrosion Behavior of Carbon Steel in Anaerobic Environment

EFFECTS OF CATHODIC PROTECTION ON CORROSION OF Q235 STEEL IN SRB CONTAINING SOILS

Understanding Copper Corrosion in Bentonite-Enriched Environments: Insights from the Point Defect Model

Calcined Clay and Limestone as Partial Replacements of Portland Cement: Electrochemical Corrosion Behavior of Low Carbon Steel Rebar as Concrete Reinforcement in Corrosive Environment

Effect of Thermally Activated Clay on Corrosion and Chloride Resistivity of Cement Mortar

Effect of water content and sodium sulfate concentration on the resistivity of red clay

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions