Abstract:In Ukraine, wood production remains one of the priority sectors of the national economy. The total area of forests is 10.4 million hectares [1-3]. Scientific institutions and commercial organizations are constantly engaged in research and development of energy-efficient technologies and equipment for the utilization of organic waste (wood biomass) generated in forestry to solve primarily energy and environmental problems. Biomass is the fourth most important fuel in the world and currently replaces 1250 million tons of conventional fuel. It accounts for about 15% of the world's primary energy sources. The advantages of biomass as a fuel are its renewable nature, low ash content, low emissions, and the preservation of the balance of carbon dioxide in the atmosphere [4]. Energy products of biomass processing can be used in common energy installations, for example, as a traditional fuel. One of the most common types of biomass of organic origin is wood. When decomposed into the main energy elements found in wood, we get about 50 % carbon, 6 % hydrogen, and 44 % oxygen. The calorific value of wood ranges from 14-17 MJ/kg. The Institute of Technical Thermophysics of the National Academy of Sciences of Ukraine (ITTF NASU) has been conducting research on various drying methods for a long time, as well as developing installations for heat treatment of fine labile materials. Studies have been conducted on drying and grinding green vegetation, clay, bark meal, industrial leather waste, etc. The studies show the prospects of using this drying method, the need to improve the design of plants for different materials, and the continuation of research on heat and mass transfer processes in them. The aim of the study is to experimentally determine the time required for dehydration of fuel chips during its drying in a fixed bed, depending on the temperature and speed of the coolant and the possible productivity of the designed new energy-saving drying plants. A series of experimental studies on convection drying of fuel wood chips on a laboratory bench called the "Fluidized bed drying bench" was carried out at the following thermal parameters temperature at the inlet of the working chamber varied from 130 °C to 180 °C; coolant velocity at the inlet of the working chamber - 0.3 - 1.2 m/s; material layer thickness - 100 mm; diameter of the working chamber - 135 mm; volume of the batch of material under study - 0.0014 m3; range of initial moisture content of the material under study (fuel wood chips) - from 46 % to 55 %; fuel wood chips had a volume content of shredded leaves - 10-20 %. In the future, the results obtained will form the basis for the development of new equipment and the creation of a methodology for engineering calculation of resource- and energy-efficient drying plants, which is the main task of further work and meets modern requirements for drying equipment.

Improving the efficiency of drying Eisenia Fetida by using a technique with induced heat and mass transfer

Designing the structure and determining the mode characteristics of the grain dryer based on thermosiphons

Justification of the design and regime parameters of a mobile grain dryer

Development of new method of drying at energy-saving universal dryer to improve quality of crops used in fodder production

RESEARCH OF HEAT AND MASS TRANSFER DURING CONVECTIVE DRYING OF COLLOID CAPILLARY-POROUS MATERIALS

Drying of Food Waste for Potential Use as Animal Feed

Energy-Efficient Dehydration Regimes for Agricultural Products with the Application of Suspension Heat Treatment

Innovative Technologies for Improving the Sustainability of the Food Drying Industry

Convective Drying at Fish Chips Technology

Drying, a practical technology for reduction of poultry litter (environmental) pollution: methods and their effects on important parameters

Investigation of the drying process of moist materials under convective heat input conditions

RESEARCH OF ENERGY EFFICIENCY OF GRAIN RAW MATERIALS DRYING USING VIBRO-OZONE COMPLEX

Experimental and computer study of the mechanism and identification of conditions for energy-efficient removal of moisture from materials under ultrasonic exposure

Effectiveness of biological drying for citric acid dewatered sludge: Evaluating the impact of energy-efficient ventilation strategies

Effect and interrelationship of different influencing factors on drying performance and energy analysis of cow manure in microwave drying at pilot scale

Design of microwave hot-airflow vibrating drying equipment for initial drying and enzymatic inactivation of fresh fruits and vegetables

Novel Drying Techniques for the Food Industry

Economic and mathematical approach to optimization of vacuum-freeze drying of the enzyme preparation inulinase Bacillus polymyxa 29

Enhancement of conductive drying of sewage sludge with mechanical compression: Drying kinetics, and interfacial heat transfer behavior

Vacuum and Infrared-Assisted Hot Air Impingement Drying for Improving the Processing Performance and Quality of Poria cocos (Schw.) Wolf Cubes

EXPERIMENTAL RESEARCH ON THE PROCESS OF DRYING FUEL CHIPS FROM WOOD WASTE IN A FIXED BED