Abstract:Electrochemically controlled solid-phase extractions of anions were interfaced on-line to electrospray mass spectrometry (ESI-MS) and inductively coupled plasma mass spectrometry (ICP-MS), using polypyrrole coated electrodes and a thin-layer electrochemical (EC) flow cell. The results indicate that electrochemically controlled solid-phase extraction (EC-SPE) can be used as a versatile potential controlled sample preparation technique for a range of anions and that the properties of the polypyrrole coatings can be modified by altering the electrodeposition conditions. In the present study, the influence of interfering anions (i.e., fluoride and sulfate), and the anion used during the electropolymerisation, on the bromide extraction recovery was investigated for EC-SPE interfaced to ICP-MS. The results of these experiments show that the interference due to the presence of similar concentrations of sulfate can be reduced when using a polypyrrole coating electropolymerised in the presence of bromide ions. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements were also used to study the morphology of the coatings, as well as the variations in the film thickness within the coatings. The effect of different desorption techniques on the bromide preconcentration factor in the ICP-MS on-line flow system was also examined. Stopped-flow desorption was found to give rise to significantly increased preconcentration factors in comparison with desorptions in flowing solutions. While the desorption efficiency depends on the type of desorption electrolyte (the electrolyte in which the desorption takes place), due to the competing influx of cations, the influence of the pH on the switching charge of the polypyrrole coating was found to be small, at constant ionic strength. To study the applicability of the EC-SPE technique with respect to real samples, investigations were also made with tap water samples spiked with different bromide concentrations. The results of these experiments, which were carried out using a modified thin-layer EC flow cell allowing in situ polymerisation of polypyrrole yielding a polymer plug covering the cross section of the channel, demonstrate that 3 microM concentrations of bromide could be detected in the tap water sample. This demonstrates that the extraction technique allows extractions of low concentrations of ions in the presence of significantly higher concentrations of other similar ions. The fact that the extraction and desorption steps are electrochemically controlled makes EC-SPE particularly well suited for inclusion in miniaturised lab-on-a-chip systems.

Electrochemically controlled solid-phase microextraction based on conductive molecularly imprinted polymer combined with ion mobility spectrometry for separation and determination of thiopental

Determination of methyl parathion by solid-phase extraction on an ionic liquid–carbon nanotube composite electrode

Detection of theophylline using molecularly imprinted polymers based on thioglycolic acid-modified CdTe quantum dots

Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO₂ nanoparticles on a stainless steel fiber

Ultrasound-assisted magnetic dispersive micro-solid-phase extraction based on carbon quantum dots/zeolite imidazolate framework-90/polyvinyl pyrrolidone/Fe3O4 followed by high-performance liquid chromatography with ultraviolet detection for trace analysis of paracetamol and etodolac in human plasma

Recent progress, challenges and trends in trace determination of drug analysis using molecularly imprinted solid-phase microextraction technology

Fabrication and evaluation of a molecular-imprinted-polymer functionalized electrode for selective electric field-assisted solid-phase microextraction of phytohormones

Development of Method for Determining Topiramate in Various Biological Matrices (Plasma, Saliva, Hair) and Its Application in Clinical Practice

On-line electrochemically controlled solid-phase extraction interfaced to electrospray and inductively coupled plasma mass spectrometry

Continuous atmospheric pressure interfaced ion trap mass spectrometry with thermal desorption for detection of nonvolatile drugs

A probe of new molecularly imprinted solid-phase extraction coupled with HPLC-DAD and atomic absorption spectrophotometry for quantification of tetracycline HCl, metronidazole and bismuth subcitrate in combination with their official impurities: Application in dosage form and human plasma

Carboxyl hybrid monolithic column in-tube solid-phase microextraction coupled with UPLC-QTRAP MS/MS for the determination of amphetamine-type stimulants

Molecularly Imprinted Polymer As Micro-Solid Phase Extraction Combined with High Performance Liquid Chromatography to Determine Phenolic Compounds in Environmental Water Samples

Fabrication and Evaluation of a Molecularly Imprinted Polymer Electrochemical Nanosensor for the Sensitive Monitoring of Phenobarbital in Biological Samples

Spherical conjugated microporous polymers for solid phase microextraction of carbamate pesticides from water samples

Investigating the drug abuse in hair samples with electrospun nanostructure PEDOT-CNT along with EA-IT-SPME

A novel restricted access material combined to molecularly imprinted polymers for selective solid-phase extraction and high performance liquid chromatography determination of 2-methoxyestradiol in plasma samples

Micro-gel thin film molecularly imprinted polymer coating for extraction of organophosphorus pesticides from water and beverage samples

Deep eutectic solvent-doped graphite as an efficient adsorbent for pipette tip micro-solid phase extraction of mitoxantrone from seawater, drug, urine and blood samples prior to its spectrophotometric determination

Ion mobility spectrometry as a simple and rapid method to measure the plasma propofol concentrations for intravenous anaesthesia monitoring

Application of Mxene as a New Generation of Highly Conductive Coating Materials for Electromembrane-Surrounded Solid-Phase Microextraction