Abstract:This study explores nitrate reduction in aqueous solutions using carboxymethyl cellulose loaded with zero-valent iron nanoparticles (Fe 0 -CMC). The structures of this nano-composite were characterized using various techniques. Based on the characterization results, the specific surface area of Fe 0 -CMC measured by the Brunauer–Emmett–Teller analysis were 39.6 m 2 /g. In addition, Scanning Electron Microscopy images displayed that spherical nano zero-valent iron particles (nZVI) with an average particle diameter of 80 nm are surrounded by carboxymethyl cellulose and no noticeable aggregates were detected. Batch experiments assessed Fe 0 -CMC's effectiveness in nitrate removal under diverse conditions including different adsorbent dosages (C s , 2–10 mg/L), contact time (t, 10–1440 min), initial pH (pH i , 2–10), temperature (T, 10–55 °C), and initial concentration of nitrate (C 0 , 10–500 mg/L). Results indicated decreased removal with higher initial pHi and C 0 , while increased Cs and T enhanced removal. The study of nitrate removal mechanism by Fe 0 -CMC revealed that the redox reaction between immobilized nZVI on the CMC surface and nitrate ions was responsible for nitrate removal, and the main product of this reaction was ammonium, which was subsequently completely removed by the synthesized nanocomposite. In addition, a stable deviation quantum particle swarm optimization algorithm (SD-QPSO) and a least square error method were employed to train the ANFIS parameters. To demonstrate model performance, a quadratic polynomial function was proposed to display the performance of the SD-QPSO algorithm in which the constant parameters were optimized through the SD-QPSO algorithm. Sensitivity analysis was conducted on the proposed quadratic polynomial function by adding a constant deviation and removing each input using two different strategies. According to the sensitivity analysis, the predicted removal efficiency was most sensitive to changes in pH i , followed by C s , T, C 0 , and t. The obtained results underscore the potential of the ANFIS model (R 2 = 0.99803, RMSE = 0.9888), and polynomial function (R 2 = 0.998256, RMSE = 1.7532) as accurate and efficient alternatives to time-consuming laboratory measurements for assessing nitrate removal efficiency. These models can offer rapid insights and predictions regarding the impact of various factors on the process, saving both time and resources.

Prediction and optimization of heavy metal ions removal efficiency from the active sludge using intelligent systems

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Artificial neural networks modeling for lead removal from aqueous solutions using iron oxide nanocomposites from bio-waste mass

Estimation of Returned Sludge Using Artificial Neural Network and Fuzzy Inference System (Case Study: Shahrake-Gharb Waste Water Treatment Plant, Tehran)

Multivariate data-based optimization of membrane adsorption process for wastewater treatment: Multi-layer perceptron adaptive neural network versus adaptive neural fuzzy inference system

Prediction of the optimal dosage of coagulants in water treatment plants through developing models based on artificial neural network fuzzy inference system (ANFIS)

A comparison of artificial intelligence models for predicting phosphate removal efficiency from wastewater using the electrocoagulation process

Neural-based modeling adsorption capacity of metal organic framework materials with application in wastewater treatment

Intelligent upgrade of waste-activated sludge dewatering process based on artificial neural network model: Core influential factor identification and non-experimental prediction of sludge dewatering performance

Biochar performance evaluation for heavy metals removal from industrial wastewater based on machine learning: Application for environmental protection

Experimental Investigation and Proposal of Artificial Neural Network Models of Lead and Cadmium Heavy Metal Ion Removal from Water Using Porous Nanomaterials

Exploring ANFIS application based on actual data from wastewater treatment plant for predicting effluent removal quality of selected major pollutants

Predictive modeling and simulation of wastewater treatment process using nano-based materials: Effect of pH and adsorbent dosage

Comparison of artificial neural network and multi-kinetic models to predict optimum retention time for dairy wastewater treatment in the integrated fixed-film activated sludge

Combination of ANNs and heuristic algorithms in modelling and optimizing of Fenton processes for industrial wastewater treatment

Enhancing municipal solid waste leachate treatment efficiency: AI-based prediction of electrocoagulation/flocculation recovery using iron electrodes

Application of artificial neural networks to predict the heavy metal contamination in the Bartin River

Application of artificial intelligence in modeling of nitrate removal process using zero-valent iron nanoparticles-loaded carboxymethyl cellulose

Development of artificial intelligence for modeling wastewater heavy metal removal: State of the art, application assessment and possible future research

Simulating wastewater treatment plants for heavy metals using machine learning models