Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Damage mechanisms and constitutive models for natural fiber‐based green composites: A review

Progressive failure analysis of 2D woven composites at the meso-micro scale

Numerical modeling of fiber reinforced polymer textile composites for characterizing the mechanical behavior – a review

A review of natural fiber composites: properties, modification and processing techniques, characterization, applications

Approaches of material selection, alignment and methods of fabrication for natural fiber polymer composites: A review

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Sustainable Natural Fiber Based Composites Materials: A Review

Recent Progress on Natural Fibers Mixed with CFRP and GFRP: Properties, Characteristics, and Failure Behaviour

Constitutive Models for the Structural Analysis of Composite Materials for the Finite Element Analysis: A Review of Recent Practices

Synthesis and Mechanical Properties of Natural Fiber Reinforced Epoxy/Polyester/Polypropylene Composites: A Review

Tensile and flexural properties of natural fiber reinforced polymer composites: A review

Thermal degradation and fire retardant behaviour of natural fibre reinforced polymeric composites- A comprehensive review

Various factors affecting the fatigue performance of natural fiber-reinforced polymer composites: a systematic review

A comprehensive review on the machining and joining characteristics of natural fiber‐reinforced polymeric composites

Review: Advanced computational modelling of composite materials

Progress Report on Natural Fiber Reinforced Composites

A critical review on damage modeling and failure analysis of pin joints in fiber reinforced composite laminates

A Review on Synthetic Fibers for Polymer Matrix Composites: Performance, Failure Modes and Applications

A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP)

Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach