Abstract:In the present work, three kinds of precipitates with different morphologies, structures, sizes, and volume fractions were obtained via energetically-tuning the microstructures of the nano-precipitated CoCrFeNiTi0.2 high-entropy alloy (HEA). Subjected to the heavy cold rolling immediately after homogeneous precipitation, L12 structured spherical nano-particles with an average size of 16.5 nm rapidly grow into 200 nm-sized spherical ones due to Ostwald ripening. On the other hand, superfluous mechanical energy storage energetically facilitates the phase transformation from spherical L12 to rod-shaped D024 structures for initially formed nano-precipitates. Besides, some other newly formed nano-precipitates with an average size of 6.5 nm are available, originating from heavily plastically deformed-induced nucleated sites. Multi-scale precipitates interact with dislocations in different ways. The strengthening provided by dislocations cutting through smaller nano-particles and bypassing grown ones account for 57.7% and 42.3% of precipitation strengthening, respectively, while rod-shaped precipitates can act as equivalent interfaces to hinder dislocation movement. Their synergistic effect has achieved remarkable strengthening and toughening. Specially, dislocation slips dominate at 298 K, while stacking faults (SFs) assist plastic deformation at 77 K. Compared with 298 K, the yield strength (YS) and ultimate tensile strength (UTS) of the current HEAs at 77 K are increased by 38.9% and 38.2% to 1 GPa and 1.5 GPa, respectively, and the tensile strain is slightly increased to 35% instead of loss, realizing excellent strength and plasticity combination. Theoretically established strengthening models agree well room-temperature and cryogenic yield strengths experimentally. Moreover, the tensile elongation is effectively predicted by the Whitehouse-Clyne model. This strengthening strategy of energetically-tuning polymorphous precipitates provides the basic guidance to develop high-performance nano-precipitated alloys. The current strengthening and plasticity models can be employed to well predict the mechanical properties of such kinds of alloys at cryogenic temperatures.

An optimization of harmonic structure nickel-saving cryogenic steel via combinatorial high-throughput experiment

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Process Optimization Method for Inhibiting TCP Precipitation in A Nickel-Based Single Crystal Superalloy with High Refractory Element Content

Chemical Component Optimization Based on Thermodynamic Calculation of Fe-1.93Mn-0.07Ni-1.96Cr-0.35Mo Ultra-High Strength Steel

On the Path to Optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti High Entropy Alloy Family for High Temperature Applications

Coupling high-throughput experiment and machine learning to optimize elemental composition in nickel-based superalloys

Process optimization of quenching and partitioning by machine learning aided with orthogonal experimental design

A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys

Optimizing the Thermomechanical Process of Nickel-Based ODS Superalloys by an Efficient Method

Kinetics Simulation and Experimental Observation of Fine Microstructure of 9％ Ni Cryogenic Steel Processed by QLT Heat-Treatment

An intelligent design for Ni-based superalloy based on machine learning and multi-objective optimization

Toward tunable mechanical behavior and enhanced elastocaloric effect in NiTi alloy by gradient structure

Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment

Remarkable Cryogenic Strengthening and Toughening in Nano-Coherent CoCrFeNiTi 0.2 High-Entropy Alloys via Energetically-Tuning Polymorphous Precipitates

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

Optimizing Heat Treatment to Improve the Microstructures and Mechanical Properties of 5crnimov Steel

Tailoring the metastable reversed austenite from metastable Mn-rich carbides

Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering

Experimental microstructure evolution and cutting simulation for dynamic mechanical behaviors of 18CrNiMo7-6 steel considering heat treatment conditions

Effect mechanism of cryogenic treatment on ferroalloy and nonferrous alloy and their weldments: A review