Abstract:Abstract: The most prevalent and widely used building material in the world is reinforced concrete. The primary building material for the majority of constructions, including buildings, bridges, etc., is reinforced concrete. Because of various factors, some of these buildings or portions of them are failing to perform as designed. The best solution to increase the load carrying capacity and extend the useful life of these inadequate structures is to strengthen them because replacing them would need significant investments and not be an appealing alternative. Even though the effectiveness of other techniques is widely accepted,a new effective and promising technique of strengthening civil engineering structures externally is gaining popularity, where fibre-reinforced polymer (FRP) is used. One of the most popular strengthening methods recently is the use of carbon fibre reinforced polymer (CFRP) to strengthen reinforced concrete beams. It provides a desirable way to improve the shear and flexural strengths of RC beams. The manner in which these composites are bonded to the beam has a significant impact on the behaviour of reinforced concrete beams in shear and flexure. The purpose of this study was to present a three-dimensional nonlinear finite element analysis (FEA) of a reinforced concrete beam (RC beam) reinforced by prestressed carbon fibre plate (CFRP plate). While there are many commercial programmes available for three-dimensional nonlinear FEA, each one has a unique ability to represent complex behaviour of composite materials, such as RC beams strengthened with prestressed CFRP plate and the contact interaction. Because of its reputation for accuracy in simulating the behaviour of a range of materials, including concrete, and its potent contact algorithms, the ABAQUS finite element programme was chosen for this work. Steel reinforcements were modelled as elastic- perfectly plastic materials, while concrete was studied using the concrete damage plasticity (CDP) constitutive model. The CFRP plate was modelled as an entirely elastic substance that breaks under the highest tensile strain. Concrete and steel reinforcement were considered to have a perfect connection, and the behaviour of concrete and CFRP plate was represented using a contact model. The FEA's findings were verified against experiment findings that were published in the literature. In terms of load-deflection behaviour, crack patterns, and mode of failure, the results were compared. The proposed FEA model was able to accurately simulate the behaviour of RC beams strengthened with prestressed CFRP plate based on the validation. To find out the impact of the thickness, width, and length of the CFRP plate, as well as the prestressing levels and steel grades, a parametric research was done. In particular, the strength of the RC beam for the ultimate load was shown to be increased by increasing prestressing of the CFRP plate. However, as prestressing increased, the fracture of the CFRP plate altered the mechanism of failure, preventing the ultimate load from increasing further. The use of higher grade steel improved the ability to support additional weight. Although the general load carrying capability of the CFRP plate was increased by lengthening the plate, it was discovered that strengthening RC beams by 25% of their shear span was sufficient and cost- effective. The load-deflection curve, failure modes, and crack patterns from the experiments are fairly reflected in the FE model.

A State-of-the-Art Review on The Behavior of RC Beams with Different Types of FRP Reinforcement

An Updated Review on the Effect of CFRP on Flexural Performance of Reinforced Concrete Beams

Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A review

Flexural and shear strengthening of reinforced concrete beams using FRP composites: A state of the art

Behavior of non-prismatic RC beams with conventional steel and green GFRP rebars for sustainable infrastructure

Flexural Strength of Concrete Beam Reinforced with CFRP Bars: A Review

Modeling Strategies of Finite Element Simulation of Reinforced Concrete Beams Strengthened with FRP: A Review

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars

CFRP for strengthening and repairing reinforced concrete: a review

A comparison between the behavior of beams strengthened by FRP sheets and FRCM composites

Aspects of behaviour of CFRP reinforced concrete beams in bending

Comparative Approach to Flexural Behavior of Reinforced Beams with GFRP, CFRP, and Steel Bars

Analysis of concrete beams reinforced by GFRP bars with varying parameters

Flexural Response of Concrete Beams Reinforced with Steel and Fiber Reinforced Polymers

Retrofitting of RC Beam Structure Member by using CFRP

Experimental investigation and numerical analysis of RC beams shear strengthened with FRP/ECC composite layer

Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs – A state-of-the-art review

Experimental Study and Numerical Modelling on Flexural and Shear Strengthening of RC Beam with Prestressed FRP Bars

Comparative Study on the Behavior of Reinforced Concrete Beam Retrofitted with CFRP Strengthening Techniques