Abstract:Lithium (Li) metal anodes are critical components for next-generation high-energy density batteries, owing to their high theoretical specific capacity (3800 mAh.g(-1)) and low voltage (-3.040 V versus the standard hydrogen electrode). However, their applications are hindered by dendrite growth, which potentially induces inner short circuit and leads to safety issues. Employing three-dimensional (3D) current collectors is an effective strategy to suppress dendrite growth by decreasing the local current density. However, many of the reported 3D current collectors have a lithiophobic surface, which leads to non-uniform Li+ ion deposition. Thus, a complicated modification process is required to increase the lithiophilic property of the current collectors. In addition, they have a large weight or volume, which greatly lowers the energy density of the entire anode. In this work, we report a lightweight 3D carbon current collector with a lithiophilic surface by employing the direct carbonization of low-cost bacterial cellulose (BC) biomass. The current collector is composed of electrically conductive, robust, and interconnected carbon nanofiber networks, which provide sufficient void space to accommodate a large amount of Li and buffer the volume changes during Li plating and stripping. More importantly, homogeneously distributed oxygen-containing functional groups on the nanofiber surface are retained by controlling the carbonization temperature. These functional groups serve as uniform nucleation sites and help realize uniform and dendrite-free Li deposition. Notably, the areal mass density of the 3D carbon current collector was only 0.32 mg.cm(-2) and its mass ratio in the whole anode was 28.8%, with a capacity of 3 mAh.cm(-2). This 3D carbon current collector facilitates the stable working of the half cells for 150 cycles under a high current density of 3 mA.cm(-2) or a high capacity of 4 mAh.cm(-2). Symmetric cells exhibit a steady cycling life as long as 600 h under a current density of 1 mA.cm(-2) and a capacity of 1 mAh.cm(-2). Moreover, appreciable cycling performance was realized in the full cells when the anodes were paired with LiNi0.8Co0.15Al0.05 cathodes. Furthermore, the low-cost raw materials and the simple preparation method promise significant potential for the future applications of the proposed 3D current collectors.

Carbon Nanotube Current Collector for Anode-free Battery

Ultralight, Dual-conductive, All-Fiber Based 3D Anode Current Collector for Anode-Free Lithium Metal Battery

Bacterial Cellulose-Derived Three-Dimensional Carbon Current Collectors for Dendrite-Free Lithium Metal Anodes

Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance.

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Cu-CNTs Current Collector Fabricated by Deformation-Driven Metallurgy for Anode-Free Li Metal Batteries

Carbon Cloth with Lithiophilic Carbon-Coated ZnO Nanotubes As Anode Current Collector for Hybrid Lithium Ion/lithium Metal Battery

Lithiophilic silver nanowires-fenced three-dimensional carbon cloth current collector for dendrite-free lithium deposition

Light-weight free-standing carbon nanotube-silicon films for anodes of lithium ion batteries

Novel Current Collector for High Energy Density Lithium-Metal Batteries

Spontaneous local redox reaction to passivate CNTs as lightweight current collector for high energy density lithium ion batteries

Direct-spun carbon nanotube sheet: A flexible, ultralight, stackable three-dimensional current collector for high-performance lithium-ion batteries

Super-aligned carbon nanotube films as current collectors for lightweight and flexible lithium ion batteries

Ultrathin Hierarchical Porous Cu Current Collector Fabricated by Anodic Oxidation in Complexing Agent System for Stable Anode-Free Lithium Metal Batteries

An electron-deficient carbon current collector for anode-free Li-metal batteries

Self-supported 3D current collector modified with in-situ formed lithiophilic [Cu(NH 3 ) 2 ]Cl for high-performance Li-metal batteries

Copper Oxide Decorated Carbon Nanofiber Skeleton for Dendrite-Free Lithium-Metal Anodes

Super-Assembled Hierarchical and Stable N-Doped Carbon Nanotube Nanoarrays for Dendrite-Free Lithium Metal Batteries

Advanced Current Collector Materials for High‐Performance Lithium Metal Anodes

Lithiophilic 3D Copper‐Based Magnetic Current Collector for Lithium‐Free Anode to Realize Deep Lithium Deposition

Highly Conductive, Light Weight, Robust, Corrosion‐Resistant, Scalable, All‐Fiber Based Current Collectors for Aqueous Acidic Batteries