Abstract:A vibration data-driven structural defect identification and classification technique is developed using frequency response under random excitation and a hierarchical neural network. A system of artificial neural networks (ANNs) is trained using finite element simulation-based synthetic data to reduce the need for many sensor measurements required otherwise. Principal component analysis (PCA) is employed to compress the high dimensionality of the vibration response data and eliminate the noise effect in the training and testing. Frequency responses data dimension for the structure with defects such a crack from stress concentration, rivet hole expansion, and attached foreign object mass such as ice accumulation in aircraft wing or fuselage are reduced using PCA and fed to a classifier network. The probabilistic decision output from the classifier network and the compressed data are then fed to the next levels of estimator networks, where each network is dedicated to the individual type of defect for the estimation of the defect parameters corresponding to that class of defect. The methodology is applied to a stiffened panel structure. The cracks and rivet hole expansions are introduced in the rivet line of the stiffener, and the foreign object mass is attached to the panel surface. The results show that it is possible to classify the defects and further estimate the defect parameters with good accuracy and reliability. It was observed that the damage classification network had an accuracy of roughly 95%. The damage localization network for crack as well as rivet expansion had average absolute error of around 2. The damage severity network was also able to perform well with a mean absolute error of about 0.34 for crack length detection and 0.22 for expanded rivet damage. However, the damage localization and severity prediction networks were quite challenging to train in the presence of multiple damages and need further development in the network architecture.

Determining the position of two cracks in a cantilever beam using artificial neural networks

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Beam Damage Assessment Using Natural Frequency Shift and Machine Learning

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

A Stacked Neural Network Model for Damage Localization

Vibration based damage detection for hybrid composite cantilever beam using finite element analysis and artificial neural network

Structural Damage Identification Using Artificial Neural Network and Synthetic data

Crack detection in supported beams based on neural network and support vector machine

Structural stress prediction based on deformations using artificial neural networks trained with artificial noise

Wave Based Damage Detection in Solid Structures Using Artificial Neural Networks

Structural Health Monitoring of Cantilever Beam, a Case Study -- Using Bayesian Neural Network AND Deep Learning

Damage Detection in Steel Beams Using Generalized Flexibility Quotient Difference Based Damage Index and Artificial Neural Network

Effectiveness Analysis of Structural Anomaly Diagnosis Based on ANN Model

A novel surrogate-based crack identification method for cantilever beam based on the change of natural frequencies

Fault Detection in Cracked Structure under Moving Load using RNNs based Approach

Neuro-symbolic model for cantilever beams damage detection

Damage detection of truss bridge joints using Artificial Neural Networks

Hierarchical Neural Network and Simulation Based Structural Defect Identification and Classification

Automated crack identification in structures using acoustic waveforms and deep learning

Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack