Abstract:Suspension bridges have become increasingly popular in recent decades due to their attractive look, effective use of structural materials, and other noteworthy features. The popularity of suspension bridges has skyrocketed among bridge engineers. These bridges are earthquake-resistant and have excellent spanning capacities. They reduce the quantity of foundation excavation and obviate the need for tall piers. Suspension bridges are hence the preferable choice when constructing long-span bridges. The interaction between the bridge and the vehicle makes it difficult to predict how a bridge will react to a moving vehicle. In addition to wind and earthquake loads, high-speed vehicle vibration must also be taken into account when designing bridges for earthquake resistance. The main goal of this study is to investigate how a multi-span suspension bridge structure responds dynamically to vehicles moving at various speeds in terms of displacement, velocity, and acceleration. In the past, the majority of research has focused on the bridge's dynamic or impact reaction rather than the response of the moving cars. This paper proposes a modeling approach for the evaluation of a multi-span suspension bridge with an orthotropic steel-box deck using the finite-element method and analyzes the various dynamic response properties of the bridge when it is loaded in accordance with various IRC loading instances, such as IRC Class A vehicle loadings and IRC 70R wheeled vehicle loading cases. Using ANSYS, finite-element method-based software, a three-dimensional finite-element model has been created. The bridge has been assessed at average vehicle speeds between 50 and 200 km/h. The proposed findings can be implemented as a revision to the IRC requirements for both short- and long-span highway bridges. The results of this investigation indicate that the vehicle’s speed has a significant impact on the dynamic responses of the bridge. The values of total acceleration, total velocity, and equivalent stress are maximum in case of IRC Class 70R wheeled ‘M’ type vehicle loading 86.626 mm/sec2, 61.944 mm/sec, and 33.094 MPa, respectively. The modeling approach described above can be used to examine any multi-span suspension bridge.

Mechanical Vibration System with Dynamic Displacement of Long Suspension Bridge

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Evaluation of Static Displacement Based on Ambient Vibration for Bridge Safety Management

Bridge Modal Identification using Acceleration Measurements within Moving Vehicles

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

An image-based bridge displacement field measurement method with self-vibration elimination

Dynamic response of a multi-span suspension bridge subjected to highway vehicle loading

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Bridge health monitoring system based on vibration measurements

Bridge Vibration Measurements Using Different Camera Placements and Techniques of Computer Vision and Deep Learning

Using limited roving sensors to monitor bridge subjected to random traffic load

Non-contact measurement of vibration modes of large cable-stayed bridge under ambient conditions: a convenient way of condition monitoring of bridges

Application of variational mode decomposition in vibration-based bridge damage detection

Damage Detection in Bridge Structure Using Vibration Data under Random Travelling Vehicle Loads

Identifying structural properties of a steel railway bridge for structural health monitoring using laser Doppler vibrometry

Coupled dynamic analysis of low and medium speed maglev vehicle-bridge interaction using SIMPACK

Dynamic Performance Analysis of Runyang Suspension Bridge Using Ambient Vibration Measurement

Discovering time-varying aeroelastic models of a long-span suspension bridge from field measurements by sparse identification of nonlinear dynamical systems

Vibration-Based Bridge Health Monitoring using Telecommunication Cables

Random Vibration Analysis of a Vehicle–Bridge Interaction System Subjected to Traveling Seismic Ground Motions Using Pseudo-excitation Method