Abstract:Calcium phosphate, particularly hydroxyapatite (HA), bears a close resemblance to human bones, rendering it a prevalent material in biomedical applications. This study focuses on the successful preparation of HA using a precipitation method with eggshell as a raw material. Subsequently, the HA powder was press-formed and sintered at various temperatures to investigate the impact of sintering temperature on the mechanical properties, including hardness, compressive strength, and fracture toughness, of the sintered HA samples (E-HA). Statistical analyses, including one-way ANOVA and Tukey's post-hoc test, were conducted to determine significant differences in these properties at different sintering temperatures. Experimental findings revealed that as the sintering temperature increased, HA partially transformed into β-TCP between 800 and 1300 °C, with α-TCP observed at 1400 °C. The elimination of pores led to an increase in relative density, with a maximum relative density of 94.5% achieved at 1200 and 1300 °C. E-HA sintered at 1200 °C exhibited the highest hardness (5.08 GPa), compressive strength (255.79 MPa), and fracture toughness (1.21 MPa·m0.5). However, at 1400 °C, a slight decrease in apparent density (2.90 g/cm3) was noted due to the presence of α-TCP, along with significant grain growth. This study's objective is clearly aligned with the study design, incorporating detailed statistical analyses to validate the findings. Furthermore, bacterial culture experiments were conducted using sintered E-HA, Chem-HA (HA synthesized from reagent-grade calcium carbonate), and Comm-HA (commercial HA). Streptococcus mutans was cultured on the surfaces of sintered E-HA, Chem-HA, and Comm-HA samples for 20 h. After culturing, the OD values for all samples were below 0.2, indicating significant antibacterial efficacy. The comparable OD values and bacterial counts (p > 0.05) suggest that the source of HA does not impact its antibacterial properties. This underscores the potential of eggshell-derived HA as an effective material for biomedical applications.

The Effect of Variations of Hydrothermal Temperatures on Ex-Situ Hydroxyapatite/Al2O3 Doping Process from Papai Shrimp (Acetes erythraeus)

Hydrothermal synthesis of nano-hydroxyapatite crystals

The Effect of Temperature Synthesis on the Purity and Crystallinity of Hydroxyapatite

Biomimetic hydroxyapatite and strontium-doped derivatives from crab shells and their ingenious scaffold fabrication for bone tissue engineering

Exploring the effect of sintering temperature on naturally derived hydroxyapatite for bio-medical applications

Effect of hydrothermal treatment temperature on the hydroxyapatite coatings deposited by electrochemical method

Phase Transformation and Mechanical Optimization of Eggshell-Derived Hydroxyapatite across a Wide Sintering Temperature Range

The Effect of Alginate Concentration on Crystallinity, Morphology, and Thermal Stability Properties of Hydroxyapatite/Alginate Composite

Hydroxyapatite based on Abalone Mussel Shells Coating on Titanium Alloy using Electrophoretic Deposition Dip Coating as a Bone Implant Candidate

Enhancing Bioactivity and Mechanical Properties of Nano-Hydroxyapatite Derived from Oyster Shells through Hydrothermal Synthesis

Effect of hydroxyapatite concentration and electrophoretic deposition (EPD) parameter process on hydroxyapatite/chitosan coating quality for porous titanium as orthopedic implant

Effect of Process Parameters on the Microstructure and Property of Hydroxyapatite Precursor Powders and Resultant Sintered Bodies

Combination of in silico and cell culture strategies to predict biomaterial performance: Effects of sintering temperature on the biological properties of hydroxyapatite

Effect of Heat Treatment of Nano-Hydroxyapatite Coatings Prepared Using Electrohydrodynamic Deposition

Effect of Deposition Temperature on the Structure, Mechanical, Electrochemical Evaluation, Degradation Rate and Peptides Adhesion of Mg and Si-Doped Hydroxyapatite Deposited on AZ31B Alloy

Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite

Synthesis of Pure Hydroxyapatite and the Effect of Synthesis Conditions on its Yield, Crystallinity, Morphology and Mean Particle Size

Effect of Sensitive pH on Hydroxyapatite Properties Synthesized from Chicken Eggshell

Synthesis of Hydroxyapatite from Cuttlefish Bone Via Hydrothermal Solid-State Conversion

Optimization of hydroxyapatite (HAp) extraction from scales of Sardinella longiceps and its conjugative effect with immunostimulants

Effect of thermal treatment on the structural, morphological, and chemical properties of apatite bioceramicsmaterials