Abstract:Heavy metals in water leads to many ecological and environmental problems. All kinds of new magnetic adsorbents are used to adsorb the heavy metals in the aqueous solution, which has the advantages of high efficiency, low consumption, simplicity, convenience, and industrialization. Firstly, Fe 3 O 4 is dissolved, and polyethylene glycol (PEG) and anhydrous sodium acetate are added. The dissolved product is placed in the reaction kettle lined with Teflon and reacts at a high temperature to obtain the Fe 3 O 4 magnetic microspheres. The product is dissolved again. After the ultrasonic water bath, 1 mL tetraethyl orthosilicate (TEOS) is added drop by drop to obtain the SiO 2 /Fe 3 O 4 magnetic microspheres by the ultrasonic and water-bath stirring. The magnetic microspheres are dissolved in 10 mL 3% chitosan solution. Chitosan/SiO 2 /Fe 3 O 4 (CSF) magnetic adsorbent is obtained after ultrasonic agitation, and chitosan-biomodified iron oxide adsorbent (EDCSF) is obtained by the ethylene diamine tetraacetic acid (EDTA) modification. After the adsorbent is obtained, the biomaterial is characterized, and its performance of adsorbing heavy metals in water is tested as an adsorbent. In the experiment, the Fourier Transform Infrared Spectroscopy (FTIR) is used to verify that EDTA successfully modifies the surface of the CSF magnetic adsorbent. Through the morphology analysis and nitrogen adsorption–desorption test, EDTA cross-linked with the amino group of chitosan through carbodiimide can cause a decrease in the related physical indexes of the material. Thermogravimetric analysis (TGA) and hysteresis loop tests show that although the magnetism of CSF and EDCSF decreases, the solid–liquid separation is achieved in a relatively short time under the action of magnets. In the adsorption test, EDCSF shows an ideal adsorption performance for Cu(II), Cd(II), and Pb(II) in aqueous solution. With pH = 4.7 and at normal temperature, the maximum saturated adsorption capacity of EDCSF for Cu(II), Cd(II), and Pb(II) is 0.696 mmol/g, 0.586 mmol/g, and 0.562 mmol/g, respectively.

Modification of Calcium Oxide from Green Mussel Shell with Iron Oxide as a Potential Adsorbent for the Removal of Iron and Manganese Ions from Acid Mine Drainage

Efficient remediation of acid mine drainage through sustainable and economical biochar-CaO composite derived from solid waste

Revealing the role of calcium alginate-biochar composite for simultaneous removing SO 4 2− and Fe 3+ in AMD: Adsorption mechanisms and application effects

Adsorption of heavy metals in water by modifying Fe3O4 nanoparticles with oxidized humic acid

Preparation of Iron and Manganese Oxides/Carbon Composite Materials for Arsenic Removal from Aqueous Solution

Efficient removal of heavy metal ions from wastewater and fixation of heavy metals in soil by manganese dioxide nanosorbents with tailored hollow mesoporous structure

Powdered Activated Carbon (PAC)-Ceramic Composite Adsorbent for Iron and Aluminum Cations Removal from Acid Mine Drainage

Resourcization of Argillaceous Limestone with Mn3O4 Modification for Efficient Adsorption of Lead, Copper, and Nickel

Investigation of the adsorption performance and mechanism of multi-source mineral composite calcination materials on heavy metal ions

Potential for high-grade recovery of rare earth elements and cobalt from acid mine drainage via adsorption to precipitated manganese (IV) oxides

Magnetite@poly(p-phenylenediamine) core–shell composite modified with salicylaldehyde for adsorption and separation of Mn (VII) from polluted water

Turning harmful Mn 2+ to treasure: In-situ formed ε-MnO 2 for removing heavy metals from acid mine drainage

A magnetic macroporous α-Fe2O3/Mn2O3 nanocomposite as an efficient adsorbent for simple and rapid removal of Pb(II) from wastewater and electronic waste leachate

Preparation of Iron Oxide Adsorbent Modified by Chitosan Biomaterials and Its Adoption in the Adsorption of Heavy Metals

Calcium alginate-biochar composite immobilized A. ferrooxid ans effectively removes sulfate and ferric iron from acid mine drainage

Kinetic Study of Adsorption of Metal Ions (Iron and Manganese) in Groundwater Using Calcium Carbide Waste

Arsenic and Cadmium Removal from Water by a Calcium-Modified and Starch-Stabilized Ferromanganese Binary Oxide

Removal of Metal(Loids) from Acid Mine Drainage Using Manganese Oxide Wastes from a Mining-Metallurgical Process

Magnesium Oxide Nanoparticles for the Adsorption of Pentavalent Arsenic from Water: Effects of Calcination

General and Controllable Synthesis of Novel Mesoporous Magnetic Iron Oxide@Carbon Encapsulates for Efficient Arsenic Removal

Mussel Inspired Preparation of Amine-Functionalized Kaolin for Effective Removal of Heavy Metal Ions