Abstract:In this study, cement was used as a component to provide a stabilizing effect in order to evaluate the hardness and stability of loess soil. To evaluate the strength properties of loess soil reinforced with cement, samples with four distinct cement concentrations (3%, 5%, 7%, and 9%) and three distinct curing durations (7, 14, and 28 days) were generated. During a series of tests, the flexural strength, direct shear strength, indirect tensile strength, and unconfined compressive strength were determined. An appropriate cement dosage was found, in addition to a durability index that could be used to quantify the effect of water absorption investigations on cement-stabilized loess. Both of these discoveries were made simultaneously. Scanning electron microscopy (SEM) and energy dispersive X-ray fluorescence spectrometry (XRF) examinations were carried out so that the fundamental mechanics of the materials could be comprehended. The results show that the cohesion of cement-stabilized loess is much more sensitive to structure than the friction angle of the material. The increase in shear strength after remoulding is due to cohesion. The SEM study showed that the cement interacted with the loess particles to produce a thick cement network that successfully covered the voids and boosted the mixture’s strength parameters. The 28-days UCS for the samples containing 7% cement was the greatest, at 3.5 MPa, while the UCS for those containing 9% cement was 4.78 MPa. The highest flexural tensile strength of 1.98 N/mm2 was determined after 28 days. The tensile strength after 7 days in samples containing 3%, 5%, 7%, and 9% cement reached a maximum force of 0.15 MPa, 0.23 MPa, 0.27 MPa, and 0.37 MPa, respectively, and increased with each passing day. To achieve the desired level of strength, it is necessary to adjust the proportion of cement. In addition, as the curing period progressed, we observed an increase in the resistance and stiffness of the cement-stabilized loess due to the interactions that take place between the structure and the mineral composition. It is believed that this event was caused by naturally occurring cementation. As a consequence of this reaction, the production of new cementitious materials takes place. The cation exchange that causes the hydration and pozzolanic reaction that leads to the creation of aggregates and interparticle flocculation is responsible for their production. These findings suggest that cement may be utilised as a simple and effective method of loess stabilization, ultimately resulting in improved performance of the loess. Therefore, this study revealed that cement may considerably enhance the microstructure and strength parameters of loess. This research provides important information on cement-stabilized loess that has ramifications for geotechnical investigation, construction, research, and testing to achieve a successful project.

Long-term Performance of Loess-cement

Microstructure and Strength Parameters of Cement-Stabilized Loess

Mechanical Properties and Evolution of Microstructure of Cement Stabilized Loess

Long-term characteristics of a stabilized expansive clay exposed to environmental-driven processes

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Experimental Study on Engineering Properties of Cemented Soil with High Water Content

Using Cement and Calcium Lignosulfonate to Improve the Mechanical Properties and Microstructure of Loess in a Seasonal Freezing Zone

Long-term leaching test of organo-contaminated cement-clay pastes

Elastic modulus, water stability and resistivity for loess solidified with white mud based solid waste cementing material: Mechanism analysis and relationship establishment

Experimental study on the performance of the modified loess by polypropylene fiber mixed with bentonite and cement

Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction

Mechanical Properties and Microscopic Study of Steel Slag–Fly Ash-Solidified Loess under Alkaline Conditions

Characterisation of 20th Century Cementitious Materials from Selected Cultural Heritage Structures in Slovenia

Study on Mechanical Properties of Permeable Polymer Treated Loess

Analysis of the Mechanical Properties of Cured Sludge by Alkaline Excitation of Phosphogypsum

Experimental Study on the Performance of Improved Collapsible Loess Mixture with Concrete Crushed Gravel

Experimental Study on Compressibility and Microstructure of Loess Solidified by Permeable Polymer

Long-term coupled behaviour of cemented paste backfill in load cell experiments

Influence of Freeze–Thaw Cycles on Physical and Mechanical Properties of Cement-Treated Silty Sand

Evaluating the Efficacy of Limestone Powder as a Partial Replacement of Ordinary Portland Cement for the Sustainable Stabilization of Sulfate-Bearing Saline Soil

Long-Term Performance and Microstructural Characterization of Dam Concrete in the Three Gorges Project