IMPLEMENTATION OF INNOVATIVE TECHNOLOGIES OF INDUSTRY 4.0 IN THE QUALITY MANAGEMENT SYSTEM OF DAIRY PRODUCTS

Margaryta Chuprina,University of Ukraine ",Svitlana Perminova,Natalia Sytnik,Igor Sikorsky Kiev Polytechnic Institute",University of Ukraine,,,,
DOI: https://doi.org/10.32782/easterneurope.36-15
2022-01-01
Abstract:The importance of ensuring the quality of dairy products for its further consumption is substantiated. It is proved that product quality control is a component of the quality management system, which, in turn, is part of the management system of the dairy enterprise as a whole. It was determined that quality management, like enterprise management, should be effective and aimed at constantly improving the quality of products, increasing the satisfaction of consumer needs. Two types of quality control are analyzed, covering all stages of the production life cycle and during their control all necessary parameters are controlled. A quality assurance program (QAP) is highlighted, which aims to monitor and control hazards and risks through product testing and the implementation of codes of practice and standard operating procedures throughout the production chain. The importance of implementing integrated programs such as Chain Quality Milk is substantiated. Disadvantages of the application of the integrated Chain Quality Milk program in the researched industry are identified, namely: quality control programs can be successful only if there is a proper basis for their implementation. Examples of the integration of Industry 4.0 into the milk processing industry are presented based on the Tetra Pak company, which released the Tetra Pak Homogenizer 250, the first of a new generation of homogenizers with improved intelligent control. The intelligent system is based on the analysis of application performance data accumulated over the past five years from 7,000 homogenizers installed worldwide. It has been found that Tetra Pak’s lines are increasingly connected to the cloud for data collection, and information is sent to the Center for Quality and Efficiency Management, where they are analyzed by experts. It is also emphasized that Industry 4.0 technologies can be implemented at all stages of the plant’s production systems, including environmental monitoring. The directions of further research are outlined, namely: improvement of the mechanism of implementation of innovative technologies of Industry 4.0 at domestic enterprises and analysis of changes that took place under their influence.
What problem does this paper attempt to address?