Abstract:Potassium-ion capacitors (KICs) have received a surge of interest because of their higher reserves and lower costs of potassium than lithium. However, the cycle performance and capacity of potassium devices have been reported to be unsatisfactory. Herein, a unique crystalline MnCo2O4.5 and amorphous MnCo2S4 core/shell nanoscale flower structure grown on graphene (@rGO) was synthesized by a two-step hydrothermal process and demonstrated in KICs. The @rGO exhibits improved electrical conductivity and excellent structural integrity during the charging and discharging process. The reasons could be attributed to the cavity structure of MCO, the mechanical buffer and high electrolyte diffusion rate of MCS, and the auxiliary effect of graphene. The electrical conductivity of shows a specific capacity of 272.3 mA h g–1 after 400 cycles at 1 A g–1 and a capacity of 125.6 mA h g–1 at 2 A g–1. Besides, the @rGO and high-surface-area activated carbon in KICs exhibit a relative energy density of 85.3 W h kg–1 and a power density of 9000 W kg–1 and outstanding cycling stability with a capacity retention of 76.6% after 5000 cycles. Moreover, the reaction mechanism of @rGO in the K-ion cell was investigated systematically using X-ray diffraction and transmission electron microscopy, providing guidance on the further development of pseudocapacitive materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16812?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16812</a>.Experimental methods, structural and electrochemical data, comparison of electrochemical performance of the @rGO anode with the other PIB anodes, and energy and power density comparison with other reported KICs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16812/suppl_file/am0c16812_si_001.pdf">PDF</a>)12 LEDs powered up by a K-ion hybrid capacitor (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16812/suppl_file/am0c16812_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Development of an Adequate Formation Protocol for a Non-Aqueous Potassium-Ion Hybrid Supercapacitor (KIC) through the Study of the Cell Swelling Phenomenon

Concunrent manipulation of anion and cation adsorption kinetics in pancake-like carbon achieves ultrastable potassium ion hybrid capacitors

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Dual-Carbon Electrode-Based High-Energy-Density Potassium-Ion Hybrid Capacitor

Interlayer Engineering of K X MnO 2 Enables Superior Alkali Metal Ion Storage for Advanced Hybrid Capacitors

Interfacial Engineered Vanadium Oxide Nanoheterostructures Synchronizing High-Energy and Long-Term Potassium-Ion Storage

Scalable waste-plastic-derived carbon nanosheets with high contents of inbuilt nitrogen/sulfur sites for high performance potassium-ion hybrid capacitors

Excellent Electrochemical Performance Of Potassium Ion Capacitor Achieved By A High Nitrogen Doped Activated Carbon

An Ultrastable Nonaqueous Potassium‐Ion Hybrid Capacitor

High-performance potassium ion capacitors enabled by hierarchical porous, large interlayer spacing, active site rich-nitrogen, and sulfur Co-doped carbon

Integrating Chemical Pre-Potassiation with Pre-Modulated KF-Rich Electrolyte Interfaces for Dual-Carbon Potassium Ion Hybrid Capacitor

Optimized Kinetics Match and Charge Balance Toward Potassium Ion Hybrid Capacitors with Ultrahigh Energy and Power Densities

Cocoon Silk-Derived, Hierarchically Porous Carbon as Anode for Highly Robust Potassium-Ion Hybrid Capacitors

Pseudocapacitive Crystalline MnCo 2 O 4.5 and Amorphous MnCo 2 S 4 Core/Shell Heterostructure with Graphene for High-Performance K-Ion Hybrid Capacitors

Direct Structure–Performance Comparison of All‐Carbon Potassium and Sodium Ion Capacitors

A Dual-Carbon Potassium-Ion Capacitor Enabled by Hollow Carbon Fibrous Electrodes with Reduced Graphitization

Designing 3D Biomorphic Nitrogen‐Doped MoSe2/Graphene Composites Toward High‐Performance Potassium‐Ion Capacitors

Fast Potassium Storage In Hierarchical Ca0.5ti2(Po4)(3)@C Microspheres Enabling High-Performance Potassium-Ion Capacitors

Amorphous carbon coated SnO2 nanohseets on hard carbon hollow spheres to boost potassium storage with high surface capacitive contributions

Pseudocapacitive Crystalline MnCo2O4.5 and Amorphous MnCo2S4 Core/Shell Heterostructure with Graphene for High-Performance K-Ion Hybrid Capacitors.

Disordered, Large Interlayer Spacing, and Oxygen‐Rich Carbon Nanosheets for Potassium Ion Hybrid Capacitor