Abstract:This article explores the waveguide phenomenon that possesses trifurcated rigid inlet/outlet and muffler conditions. Additionally, this waveguide is linked to a finite, thin, and flexible shell with the aid of partitioning discs located at the interfaces. The inside of the discs is coated with sound absorbent material, which can be fibrous or perforated, depending on the impedance conditions of the surface. To demonstrate the use of absorbent material at the interfaces, impedance formulation is used. The mode matching procedure is then utilized to find solution, it relies on the orthogonality conditions accompanying the material characteristics of the bounding surface and within the fluid. The study includes modeling the utilization of absorbent material at interfaces, and numerical experiments to analyze the acoustic attenuation. The analysis focuses on a specific configuration with duct region radii and a half length of the chamber at a frequency of 700 Hz. The results demonstrate that the absorption of power and transmission loss versus frequency vary through the fibrous coating and the edge conditions, and changing the clamped ends to pin-jointed ends optimizes the dispersion powers and the loss due to transmission. The study yields useful information to the acoustic dispersion via flexural expansion chamber, highlighting the importance of material properties, edge conditions, and configuration settings in the acoustic attenuation. The mode matching method and numerical experiments presented in this study can be useful for designing acoustic devices with flexible shells, providing a better understanding of the underlying physics and optimizing their performance.

The Dipole Resonator and Dipole Waveguide Insulator in Dense Liquid Medium

Sound Waves in a Medium with Resonance Inclusions of a Dipole Type

One-dimensional acoustic waves in retarding structures with propagation velocity tending to zero

Resonant signal reversal in a waveguide connected to a resonator

Ring-Shaped Linear Waves and Solitons in a Square Lattice of Acoustic Waveguides

Mechanism of Wave Resonance Based on Excitation of Evanescent Waves in Locally Expanded Waveguides

Steady-State Multiple Near Resonances Of Periodic Interfacial Waves With Rigid Boundary

Perfect absorption of water waves by linear or nonlinear critical coupling

A mode-matching analysis of flexible shells and waveguides with partitioning and muffler conditions

On the dependence of acoustic modes on media parameters in the Pekeris-Airy Waveguide

A synchrotron-like pumped ring resonator for water waves

Three-dimensional acoustic double-zero-index medium with a Dirac-like point

Dispersion analysis of leaky guided waves in fluid-loaded waveguides of generic shape

Suppression of Bending Waves in a Beam Using Resonators with Different Separation Lengths

Simulation of Internally Referenced Resonance in a Three-Layer-coated Microsphere Resonator

Hybrid Long-Range Surface Plasmon-Polariton Modes with Tight Field Confinement Guided by Asymmetrical Waveguides

“Percolation” of acoustic wave in acoustic waveguide composed of two zero-index mediums

Studies on Dual Helmholtz Resonators and Asymmetric Waveguides for Ventilated Soundproofing

3.5 GHz longitudinal leaky surface acoustic wave resonator using a multilayered waveguide structure for high acoustic energy confinement

Wave Propagation in Deep-Subwavelength Mode Waveguides.

Open Waveguide Cavity Using a Negative Index Medium.