Abstract:Neutronic, thermal-hydraulics, and solid mechanics computations were used to study the different VVER-1000 reactors' operational conditions for the steady-state and the transient state. The main objective of these studies is to investigate the safe operating conditions, which is essential in determining the reactor safety limits. The coupling between different physics enables a better understanding of reactor phenomena and enhanced accuracy by reducing the assumption needed for separate calculations for different physics. MCNPX code is used to provide the source power distribution for two themes of calculations. The first theme is the analytical solution using MATLAB software, and the second theme is the finite element coupled physics using COMSOL Multiphysics. Analytical solutions using MATLAB software and results from COMSOL-Multiphysics were used to simulate the uncoupled analytical models and coupled models, respectively. The coupled theme provide feedbacks between different physics by iterating the solution between different physics; such as solving the heat transfer with taking into consideration the variation of the coolant velocity along the coolant channel and solving solid mechanics with taking into consideration the change of either the fuel and the clad temperatures distribution (thermal load) or the change in the coolant pressure (pressure load). While in the uncoupled solutions, certain assumptions reflect an average behavior for the effect of other physics on the physics under concern, such as the average pressure of the coolant and the average value for the coolant velocity. The obtained results are verified by comparing it to WIMS D-4 for neutronic calculations and COPERA-EN code for the thermal-hydraulic analytical solution. Also, thermal-hydraulic results by both coupled and uncoupled themes are verified against results from the final safety analysis report. The Departure from Nucleate Boiling Ratio (DNBR) and the Minimum Departure from Nucleate Boiling Ratio (MDNBR) were applied for the investigation of VVER-1000 reactor safety parameters. Solid mechanics, fluid dynamics and heat transfer were used to compute the maximum stress/maximum volumetric strain acting on both fuel and cladding material. Results from both methods satisfied the limits addressed by the designer and shows a good agreement with the other published works that used WIMS D-4 for neutronic calculations and COBRA-EN code for thermal-hydraulic calculations analytically. in addition, the maximum stress occurring on the fuel and clad materials didn't exceed the yield stress. Furthermore, the fuel material displacement didn't exceed the Helium gap thickness, which means the surface contact between the fuel and the clad material is impossible that prevents the chemical interaction between both fuel and clad at 1135 K.

NEUTRONIC ANALYSIS OF THE VVER-1200 LATTICE CELL FUEL USING WIMSD-5B CODE

NEUTRONIC CALCULATION FOR PWR MOX FUEL PIN CELLS WITH WIMSD-5B CODE

STUDY ON CRITICALITY AND NEUTRONIC SAFETY PARAMETERS OF NUSCALE FUEL ASSEMBLY

Review and comparison of neutronic parameters of VVER-1200 and PWR fuel assemblies with different burnable absorbers

Thermal-hydraulic and solid mechanics safety analysis for VVER-1000 reactor using analytical and CFD approaches

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Neutronic examination of the U–Mo accident tolerant fuel for VVER-1200 reactors

Dynamic Characteristics Analysis of NuScale in Frequency Domain

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Sensitivity of the neutron multiplication factor to water ingress into a spent fuel cask

The Effect of Serpent 2 Calculation Parameters on Evaluated Spent Nuclear Fuel Source Term

Neutronic analysis of new generation TVS-2M fuel assemblies in VVER-1000 reactor type

Multi-physics Coupled Analyzes of Research Nuclear Reactors Based on Steady-State and Kinetics Models

Neutronics Analysis of VVER-1000 Core Using At-Fcm Fuel

Neutronic analysis of european sodium-cooled fast reactor using Monte Carlo

Uncertainty Analysis of Infinite Multiplication Factor and Nuclide Number Density Based on the UAM-PWR Benchmark with Respect to Cross Sections, Fission Yields and Decay Half-Life

Fuel Performance Comparison of Uranium Nitride and Uranium Carbide in VVER-1200 using OpenMC

A Three-Dimensional Variational Nodal Method for Pin-Resolved Neutron Transport Analysis of Pressurized Water Reactors

Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

Analysis of Reactivity Coefficients of Chernobyl Reactor by Cell Calculation

Neutronic characteristics of the VVER-1000 fuel assembly with mechanical spectral shift regulation