Abstract:Passive tuned mass dampers (TMDs) have been increasingly investigated for vibration control of wind turbines. However, TMD designs based on individual or a few operating conditions may result in insufficient consideration of the TMD's impact on wind turbines. For instance, the influence of end-stop collision forces on the main structural damage may be significantly underestimated, thereby affecting the overall lifecycle evaluation. In this study, focusing on large offshore fixed-bottom monopile wind turbines, we propose an integrated TMD design methodology taking the damper displacement constraints into full account. A comprehensive optimization of the passive omnidirectional pendulum-type TMD is conducted considering large number of operating conditions in the offshore environment. Next, a real-world application of the optimally designed TMD is performed for a 6450 kW monopile offshore wind on the Yellow Sea, China. We develop an on-site testing methodology and evaluation criteria for assessing the effectiveness of the TMD offshore. The results of resonance, emergency stop, operatingand reliability test conditions demonstrate the following: under the optimized TMD design taking into account all operating conditions, the TMD with a mass ratio of 1.56% can offer added damping in the fore-aft and side-side directions of the turbine, and provides the desired damping ratio of 1%; within a 4% frequency range around the design frequency, the TMD achieves effective vibration control; at rated power, the TMD achieves a reduction of more than 50% in the amplitude of the tower base side-side bending moment (Mx). The integrated TMD design with displacement constraints allows for the optimal TMD design across all operating conditions, thereby achieving superior overall vibration control and reduction in fatigue loads. The successful real-world application of the TMD based on integrated design methodology is of high value to the research community.

Sheet Pile Tuned Mass Damper for Construction Noise Control

Analytical Solution for Sheet-Pile Groin Vibrations under Tidal Bore Excitation

A Double-Tuned Pendulum Mass Damper Employing a Pounding Damping Mechanism for Vibration Control of High-Rise Structures

Field monitoring for silence piling construction in deep soft soil foundation

Multiple Tuned Mass Dampers for Wind Induced Vibration Control of a Cable-Supported Roof

Integrated design and real-world application of a tuned mass damper (TMD) with displacement constraints for large offshore monopile wind turbines

Dynamic response and optimal design of structures with large mass ratio TMD

Control of Metro Train-Induced Vibrations in a Laboratory Using Periodic Piles

Seismic performance of soft soil foundation with a new type of assembled wall tuned mass damper

Optimization Study of a Tuned Mass Damper for a Large Monopile Wind Turbine

Application of an Eddy Current-Tuned Mass Damper to Vibration Mitigation of Offshore Wind Turbines

Pounding tuned mass damper with constrained layer damping

Seismic Performances of a Structure Equipped with a Large Mass Ratio Multiple Tuned Mass Damper

Vibration control of a pentapod offshore wind turbine under combined seismic wind and wave loads using multiple tuned mass damper

Optimization of the Seismic Performance of a Steel-Concrete Wind Turbine Tower with the Tuned Mass Damper

Optimal Design of Multiple Tuned Mass Dampers for Vibration Control of a Cable-Supported Roof

Optimal Design Formula for Tuned Mass Damper Based on an Analytical Solution of Interaction between Soil and Structure with Rigid Foundation Subjected to Plane SH-Waves

Seismic Performance Assessment of Semi Active Tuned Mass Damper in an MRF Steel Building Including Nonlinear Soil–Pile–Structure Interaction

Vibration control of a monopile offshore wind turbines under recorded seismic waves

Reduction of vibration during construction of bridge towers by tmd

Lateral vibration mitigation of monopile offshore wind turbines with a spring pendulum pounding tuned mass damper