Abstract:Objective: The objective of this study is to investigate the effects of crash-related car parameters on head and chest injury measures for 3- and 12-year-old children in near-side impacts. Methods: The evaluation was made using a model of a complete passenger car that was impacted laterally by a barrier. The car model was validated in 2 crash conditions: the Insurance Institute for Highway Safety (IIHS) and the US New Car Assessment Program (NCAP) side impact tests. The Small Side Impact Dummy (SID-IIs) and the human body model 3 (HBM3) (Total HUman Model for Safety [THUMS] 3-year-old) finite element models were used for the parametric investigation (HBM3 on a booster). The car parameters were as follows: vehicle mass, side impact structure stiffness, a head air bag, a thorax-pelvis air bag, and a seat belt with pretensioner. The studied dependent variables were as follows: resultant head linear acceleration, resultant head rotational acceleration, chest viscous criterion, rib deflection, and relative velocity at head impact. The chest measurements were only considered for the SID-IIs. Results: The head air bag had the greatest effect on the head measurements for both of the occupant models. On average, it reduced the peak head linear acceleration by 54 g for the HBM3 and 78 g for the SID-IIs. The seat belt had the second greatest effect on the head measurements; the peak head linear accelerations were reduced on average by 39 g (HBM3) and 44 g (SID-IIs). The high stiffness side structure increased the SID-IIs' head acceleration, whereas it had marginal effect on the HBM3. The vehicle mass had a marginal effect on SID-IIs' head accelerations, whereas the lower vehicle mass caused 18 g higher head acceleration for HBM3 and the greatest rotational acceleration. The thorax-pelvis air bag, vehicle mass, and seat belt pretensioner affected the chest measurements the most. The presence of a thorax-pelvis air bag, high vehicle mass, and a seat belt pretensioner all reduced the chest viscous criterion (VC) and peak rib deflection in the SID-IIs. Conclusions: The head and thorax-pelvis air bags have the potential to reduce injury measurements for both the SID-IIs and the HBM3, provided that the air bag properties are designed to consider these occupant sizes also. The seat belt pretensioner is also effective, provided that the lateral translation of the torso is managed by other features. The importance of lateral movement management is greater the smaller the occupant is. Light vehicles require interior restraint systems of higher performance than heavy vehicles do to achieve the same level of injury measures for a given side structure.

Numerical Simulation of Interaction Between a Passenger Car Airbag and an Anthropomorphic Dummy Model

Numerical Simulation of Out-of-Position Front Passenger Injuries in Frontal Crashes Using an Accurate Finite Element Model of the Cockpit Module

Multiphysics out of position airbag simulation

Advanced smart airbags: The solution for real-life safety?

Computer Simulations of Contact Forces for Airbags with Different Folding Patterns During Deployment Phase

A Numerical Analysis of Pre-Deployment Effect of Side-Impact Airbags in Reducing Occupant Injuries

Numerical modelling of different airbag folding patterns and their influence on occupant responses in frontal vehicle impact

Numerical parametric study on factors affecting passenger safety in motorcoach frontal collision

Investigating occupant safety through simulating the interaction between side curtain airbag deployment and an out-of-position occupant

Integrated Occupant-Car Crash Simulation with the Finite Element Method: The Porsche Hybrid III-Dummy and Airbag Model

Injury effects of knee airbags on Chinese human dummy

Injury Biomechanics Evaluation of a Driver with Disabilities during a Road Accident-A Numerical Approach

Numerical modelling and experimental analysis of the passenger side airbag deployment in out-of-position

Numerical analysis of side airbags deployment in out-of-position situations

Multi-Parameter and Multi-Objective Optimization of Occupant Restraint System in Frontal Collision

Metamodel Generation for Frontal Crash Scenario of a Passenger Car

On the use of hybrid shock absorbers to increase safety of commercial aircraft passengers during a crash event

Research and Analysis of Frontal Collision of Passenger Cars Based on ANSYS

Numerical and experimental investigations on the behaviour of the sandwiched tube-type airbag

Sensitivity analysis and optimization for occupant safety in automotive frontal crash test

Parameter study for child injury mitigation in near-side impacts through FE simulations