Abstract:The article presents the results of experimental study for types of loose soils are easily subject to dusting. In connection with this problem, the task is the study and study of the causes and structure of the formation of dustiness in the roadside zone of roads with common types of coatings or without coatings. The experimental study aims to determine the drying time of chemical dust prevention solutions under the influence of solar radiation and the norm of their distribution. The object of the research is dust generated on roads with low transport and operational performance (temporary roads in places of road repair work, roads to quarries, etc.), and materials used for dedusting road surfaces. The problem to be solved is to reduce the emission of a large amount of dust on roads without pavements or with inferior types of pavements, which adversely affects the human body. The results obtained are the identification of a way to combat dust on road surfaces, ensuring a decrease in wear when vehicles move on roads without pavements. At the same time, the classification of dust according to their sources of formation is expected at the output result. Due to their features and characteristics, these results allowed the author to solve this problem - effective ways to combat dust on road surfaces are: treating them with dust-removing materials that reduce wear; maintaining the original evenness; reduction of air pollution; improvement of traffic conditions for cars and the sanitary and hygienic condition of roads near settlements. For experimental tests, traditional salt solutions of various concentrations (NaCl, MgCl2, CaCl2, MgCl2×6H2O, etc.) and solutions of foreign–made stabilizing additives Durasoil and Soiltac from SOILWORKS were taken.

Substantiation of application technology of hygroscopic materials for dust prevention of roads with the lowest type of surfaces