Abstract:In the present work, a green high-yielding method for the preparation of graphene is introduced via ultrasonic-assisted liquid phase exfoliation (LPE) of graphite in a green solvent medium, since the common preparation method of graphene via graphite oxide is hazardous. A high concentration of 3.2 mg/ml graphene is achieved here in a comparatively short duration of 3 h ultrasonication. By using a mixed solvents strategy (acetophenone and isopropyl alcohol, 1:19 V/V), surface energy requirements needed for the exfoliation of graphite are satisfied here with acetophenone, where isopropyl alcohol further facilitated the exfoliation via non-conventional CH-π and OH-π interactions. Turbostratic graphene in high-yield (16 %) in a simple means of ultrasonic assisted LPE is the added attraction of the present procedure. The less-defective structure of graphene, its few-layered turbostratic nature, and edge functionalization of the sheets are evident from the material characterization via Raman spectroscopy, XRD, TEM-SAED, and XPS analyses. Here, we report a combination of the attractive conducting polymer polyaniline (PANI) with the as-prepared graphene for supercapacitor applications, where the PANI/graphene nanocomposites with different aniline concentrations (PANI1.125/G, PANI4.5/G, and PANI9/G) have been prepared via in-situ polymerization of aniline in the graphene dispersion. The structure and morphology of the nanocomposites are investigated using different characterization techniques which revealed that the molecular structure of the PANI is retained in the nanocomposites even with a strong interaction with graphene. FESEM and TEM images revealed the good coverage of graphene sheets with PANI that limit the volume change of PANI during the repeated charge-discharge processes. Electrochemical studies showed that PANI4.5/G has the highest specific capacitance of 126.16 mF/cm2 at a current density of 1 mA/cm2, resulting from the perfect combination of the pseudocapacitance behavior of the PANI along with the electrical double layer capacitance of graphene. A symmetric supercapacitor device is also fabricated with PANI4.5/G, which showed the highest areal capacitance of 116.38 mF/cm2 similar to that with three-electrode studies and also good cycling stability with 87 % capacitance retention in the specific capacitance after 6000 cycles. It also exhibited an energy density of 16 µWh/cm2 (0.29 Wh/kg) and a power density of 3.99 mW/cm2 (72.72 W/kg).

Preparation of Reduced Graphene Oxide/Polyaniline Composite Conductive Materials by Ultrasonic-Assisted In Situ Polymerization

Praparation, Characterizations, and Its Potential Applications of PANi/ Graphene Oxide Nanocomposite

Preparation of Graphene Sheets/polyimide Nanocomposite Films by In-Situ Polymerization

Preparation of Highly Conductive Polypyrrole/Graphite Oxide Composites Via in Situ Polymerization

Preparation of polyaniline@graphene nanocomposite with oxidative polymerization of pre-assembled of aniline for supercapacitor electrodes

In situ one-pot synthesis of graphene–polyaniline nanofiber composite for high-performance electrochemical capacitors

In Situ Iodoalkane-Reduction of Graphene Oxide in a Polymer Matrix: an Easy and Effective Approach for the Fabrication of Conductive Composites

Electrochemical Synthesis of Layer-by-layer Reduced Graphene Oxide Sheets/polyaniline Nanofibers Composite and Its Electrochemical Performance

Covalently linked benzimidazole-containing reduced graphene oxide/polyaniline nanocomposites as electrode materials

Preparation of a Graphene Nanosheet/polyaniline Composite with High Specific Capacitance

Synthesis and characterization of CTAB‐intercalated graphene/polyaniline nanocomposites via in situ oxidative polymerization

An environmentally sustainable ultrasonic-assisted exfoliation approach to graphene and its nanocompositing with polyaniline for supercapacitor applications

Graphene, graphene oxide or modified graphene in polyaniline based nanocomposites—features and technical highlights

Preparation and Performance Study of Carboxy-Functionalized Graphene Oxide Composite Polyaniline Modified Water-Based Epoxy Zinc-Rich Coatings

Preparation method of thin layer graphene polymer composite material

Progress in Controllable Preparation and Electrochemical Applications of Graphene/Poly (pyrrole) Composites

Preparation of High-performance Covalently Bonded Polyaniline Nanorods/Graphene Supercapacitor Electrode Materials Using Interfacial Copolymerization Approach

Graphene/Polyaniline Nanofiber Composites as Supercapacitor Electrodes

Postcomposition Preparation and Supercapacitive Properties of Polyaniline Nanotube/Graphene Oxide Composites with Interfacial Electrostatic Interaction

One‐Step Electrochemical Synthesis of Graphene/Polyaniline Composite Film and Its Applications

Facile synthesis of 3D reduced graphene oxide and its polyaniline composite for super capacitor application