Abstract:Abstract A real industrial electroplating rinsing wastewater was collected and subjected to physical and chemical examination. The study showed that it can be categorized as high strength wastewater, at pH- 2, COD 1430 mg/l, and high level of metals above permissible limits, namely: 150, 30, 25, and 2.9 for Ni, Cu, Zn, and Fe mg/l respectively. Therefore, metals must be adequately removed before discharging to avoid any hazardous impact on the environment. Similar synthetic wastewater was prepared to study the effect of chemical coagulation for the precipitation of metals. The optimum removal rate was achieved by using a combination of lime and ferric chloride at 100 and 30 mg/l respectively. The chemically treated electroplating wastewater was subjected to an electrocoagulation study. A comparison between iron and stainless-steel electrodes for the removal of metals was investigated. Furthermore, the effect of different electric voltages, and contact time on metals removal efficiency were also examined. It was found that the optimum removal capacity was achieved when a stainless steel electrode was employed in the presence of ferric chloride as coagulant, at 10 volts, 30 min. contact time, and pH 9 for synthetic solution. In a batch treatment system, the real industrial wastewater was treated at the predetermined optimum operating conditions; the removal of metals was 92.1%, 87.8% and 82.9% for Ni. Zn, and Cu respectively. By employing a continuous flow reactor for the treatment of the same real wastewater and under the same operating conditions, metals removal rate increased to 98.9%, 97.4% and 96.6% for Ni. Zn, and Cu respectively. The level of metals in the final treated wastewater copes with Egyptian Environmental Regulation. The overall results confirmed that the electro-coagulation (EC) technology offers an effective alternative process in combination with the conventional chemical coagulation process for reaching high removal performance of toxic metals from the electroplating wastewater. The advantage of EC technique is achieving high treatment efficiency instead of expensive chemical reagents, high construction cost and/or other conventional processes. In addition, the final treated water can be reused for rinsing process in the electroplating industry and/or discharging without any environmental hazard effect. It is also recommended to employ solar energy instead of electricity to reduce cost of operation.

Electrocoagulation as an efficient technology for nitrate removal from water

Simultaneous Removal of Nitrate and Hardness Ions from Groundwater Using Electrodeionization

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

A hybrid system for groundwater denitrification using electrocoagulation and adsorption

Removal of nutrients and other emerging inorganic contaminants from water and wastewater by electrocoagulation process

Development of an electrodeionization and electrodialysis process for the removal of nitrate from drinking water

A novel combined system for efficient nitrate removal using a continuous flow electrocoagulation and sand filtration (FECF) reactor: Statistical analysis by Taguchi design

Effects of Different Applied Electric Currents on Nitrate Removal Using the Biofilm-Electrode Reactor

Experiment on removal of nitrate from water by electrolysis with two-dimensional electrode

Nickel removal from wastewater using electrocoagulation process with zinc electrodes under various operating conditions: performance investigation, mechanism exploration, and cost analysis

Removal of Nitrates in Drinking Water Polluted with Landfill Leachate by an Electrocoagulation System with Mg-Zn

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Study of Influential Elements on Nitrate Removal from Simulated Groundwater by Biofilm Electrode Reactor

Hospital wastewater treatment using electrocoagulation: Performance, kinetics, settlement analysis, and cost-effectiveness

Treatment of industrial electroplating wastewater for metals removal via electrocoagulation continous flow reactors

Treatment of contaminated river water by batch electrocoagulation system using aluminium and iron electrodes: Performance of process and statistical analysis

Groundwater Remediation By Three-Dimensional Electrode Biofilm Reactor

A review of electrocoagulation as a promising coagulation process for improved organic and inorganic matters removal by electrophoresis and electroflotation

Adopting electrocoagulation technology for removing arsenic from contaminated water

Evaluation Study of Ammonium Removal from Groundwater by Electrodialysis: Case Study of Real Groundwater from the City of Kenitra in Morocco

Minimizing the Fluoride Load in Water Using the Electrocoagulation Method: An Experimental Approach