Abstract:The light-weighting of a robotic arm is an important aspect of robot research. In the operation of existing welding robots, excessive vibrations in the welding actuators have been observed, which lead to reduced welding precision and work efficiency. The direct connection between the forearm and the welding actuator is a key component that affects vibrations. Based on this, a study on light-weighting the forearm is proposed. Using the theory of topology optimization with variable density structure, the structural dimensions, shapes, and geometric parameters of the forearm are optimized. The material removal methods of "hole cutting" and "local hollowing" are employed to reconstruct the forearm structure model. Static, modal, and transient simulations were performed on the forearm model pre-optimization and post-optimization. The optimization results show that the mass of the forearm is reduced by 19.8%. The static simulation comparative analysis shows that, under the same constraints and load conditions, the maximum total deformation of the optimized forearm is reduced by 3.6%, the maximum stress is reduced by 3.2%, and the maximum equivalent elastic strain is reduced by 5.7%. The optimized forearm structure is more reasonable and exhibits better mechanical performance. Modal simulation comparative analysis shows that the first and second natural frequencies of the optimized forearm are increased by 9.8% and 7.0%, respectively. Transient simulation comparative analysis demonstrates that, under the maximum operating condition, the vibration frequency and amplitude of the optimized welding robot forearm are reduced by 19.4% and 26.9%, respectively. The maximum amplitudes of the maximum equivalent stress curve and maximum equivalent elastic strain curve are reduced by 51.0% and 46.0%, respectively. This study provides a guarantee for reducing vibrations in welding actuators, improving welding precision, and enhancing the work efficiency of the welding robot.

Topology optimization of robotic arm for gas drainage pipeline installation

Property Analysis and Structure Optimization of Robotic Arm Based on SolidWorks and ANSYS

Topology Optimization Design of a Lightweight Integrated Manifold with Low Pressure Loss in a Hydraulic Quadruped Robot Actuator

Worst Case Identification Based Topology Optimization of a 2-Dof Hybrid Robotic Arm

Optimization Design for Link Structure of Heavy-Duty Transfer Robot Based on Response Surface Method

The Path-Engulfment Method for Topology Optimization of Structures

Study on Topology Optimization for High Dynamic Flight Simulator Based on Hyperworks

Topology Optimization of the Active Arms for a High-Speed Parallel Robot Based on Variable Height Method.

Light-Weighting and Comparative Simulation Analysis of the Forearm of Welding Robots

Topology Optimization for the Base of Parallel Loading Device

Structural Topology Optimization Research for A Six-DOF Space Robotic Manipulator

Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics

A topology optimization method for collaborative robot lightweight design based on orthogonal experiment and its applications

Optimization design and finite element analysis of welding robot base based on ANSYS Workbench

Topology Optimization of Biped Robot Based on Rigid-flexible Coupling Dynamics

Structural optimisation method of six degrees of freedom manipulator based on finite element analysis

Optimization design of aerial work vehicle turntable based on topology optimization

Topology Optimization in Support of Spaceborne Device Based on Variable Density Method

Optimization Design and Simulation of Discharge Mechanism of Modified In-Pipe Clearing Robots

Structural Optimization Design of a Six-Degrees-of-Freedom Serial Robot with Integrated Topology and Dimensional Parameters

TOPOLOGICAL OPTIMIZATION OF DESIGN ELEMENTS OF A ROBOTIC CELL