Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Control of the microscale variable stiffness mechanism driven by electrical heating of the CNT-based stretchable electrode

Self-recovery and self-conducting epoxy-based shape memory polymer microactuator

Conductive Nanoparticles in Electro Activated Shape Memory Polymer Sensor and Actuator

Improved heating method for shape-memory alloy using carbon nanotube and silver paste

Shape-Memory Polymer Nanocomposites with A 3d Conductive Network for Bidirectional Actuation and Locomotion Application

A Highly Integrated Shape Memory Alloy Actuator with Precision Real-time Self-sensing Control

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

A Novel Variable Stiffness and Tunable Bending Shape Soft Robotic Finger Based on Thermoresponsive Polymers

Actuation Of Shape Memory Polymer By Resistive Heating Of Carbon Nanopaper

Mobilizing and Antagonistic Stiffness Control for SMA Artificial Muscle Actuator Protected by Rolled Film Tube

A Novel Sulfur‐Containing Carbon Nanotubes with Graphene Nanoflaps for Stretchable Sensing, Joule Heating, and Electro‐Thermal Actuating

Highly Inductive Coil Spring Strain/Compress Sensors Integrated with Shape Memory Alloy and Shape Memory Polymers-CNTs

A DIY Fabrication Approach of Stretchable Sensors Using Carbon Nano Tube Powder for Wearable Device

Equipping New SMA Artificial Muscles With Controllable MRF Exoskeletons for Robotic Manipulators and Grippers

High-Performance, Low-Voltage, and Easy-Operable Bending Actuator Based on Aligned Carbon Nanotube/Polymer Composites

Tunable deformation behavior of 4D printed shape memory polymers with embedded pre-stretched elastomers

Modeling and Analysis of SMA Actuator Embedded in Stretchable Coolant Vascular Pursuing Artificial Muscles

Engineering heterogeneous domains and interfaces in shape memory fibers for tunable responsive behaviors

Intergrated Shape Memory Alloys Soft Actuators with Periodic and Inhomogeneous Deformations by Modulating Elastic Tendon Structures

Ultra‐large Stress and Strain Polymer Nanocomposite Actuators Incorporating a Mutually‐Interpenetrated, Collective‐Deformation Carbon Nanotube Network

4D Printing of Ag Nanowire-Embedded Shape Memory Composites with Stable and Controllable Electrical Responsivity: Implications for Flexible Actuators