Abstract:Rail transport is the most sustainable transportation mode, with the lowest energy consumption and carbon footprint. However, the noise induced by railway traffic in urban regions is a significant drawback and several reports point out the risks and the amount of people suffering from direct exposure to railway noise. One of the most used mitigation measures for railway noise is the implementation of noise barriers. Although they offer a significant reduction in noise levels, their height makes people feel enclosed. Therefore, in the case of railway infrastructure, the solution to the problem may lie in the use of barriers with a lower height placed close to the railway track. As the noise-forming mechanisms are mainly located at the track level, placing the barrier in a position close to the track allows mitigating rail noise without causing the problems identified above for the population in the vicinity. The purpose of this paper is to illustrate the development of a barrier solution to be used in a railway context through numerical modelling with the Boundary Element Method (BEM). The solutions developed were placed close to the track and have a low height. The geometry was defined so as to direct the energy back to the track to take advantage of the acoustic properties of the ballast. The addition of a porous granular material on the inner face of the barrier allows the control of reflections between the vehicle body and the barrier, increasing its acoustic efficiency. Finally, considering the most efficient solution, the insertion loss in a network of receivers located 10 m away from the track is analysed in order to study the noise reduction levels in a place where human receivers are usually located.

LOWNOISEPAD: Low-cost noise control by optimized rail pad: Feasibility study on the use of rail pad as noise mitigation measure

The influence of the non-linear stiffness behaviour of rail pads on the track component of rolling noise

[Optimally Control Urban Railway Noise by Sound Propagation Path].

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

Mitigation of Ground Vibration Generated by High-Speed Trains on Saturated Poroelastic Ground with Under-Sleeper Pads

Performance of Low-Height Railway Noise Barriers with Porous Materials

Integrated design of passive control methods for mitigating vibration and noise of rails in high-speed railway

The Use of Under Sleeper Pads to Improve the Performance of Rail Tracks

Enhancing railway noise reduction through advanced multilayer acoustic absorbent systems with tunable resonators

Low Cost Noise Barriers for Mitigation of Rail Noise

A step-by-step experimental characterization of a low-height acoustic barrier for railway applications

Field Experiment as a Tool to Verify The Effectiveness of Prototype Track Structure Components Aimed at Reducing Railway Noise Nuisance

Effect of Rail Pad Stiffness on Vehicle–Track Dynamic Interaction Excited by Rail Corrugation in Metro

Theoretical Study on Noise Reduction of Rail Component by Use of Rail Absorber

Monitoring of Railpad Long-term Condition in Turnouts Using Extreme Value Distributions

Behaviour of under sleeper pads at switches and crossings - Field measurements

Constrained Damping Dynamic Absorber Stuck on a Rail of Urban Transits

Experimental evaluation and numerical interpretation of various noise mitigation strategies for in-service elevated suburban rail

Research on Simulation Platform Architecture for Noise Reduction of Electric Locomotive Wheel

The effect of temperature on railway rolling noise

Study on the Noise Distribution in High-Speed Railway Coaches and the Characteristics of Noise Reduction Material