Abstract:The utilization of sustainable resources such as biomass to produce fuels and chemicals has recently attracted significant attention due to the depletion of fossil reserves, increasing energy demand, and growing environmental concerns. Long-chain fatty acids, which are major constituents of plant oil, are important feedstock for biorefinery. Besides producing well-known biodiesels, the hydrogenation of fatty acids to fatty alcohols has recently drawn significant attention due to the versatility and growing market value of fatty alcohols. An example of heterogenous iron-catalyzed selective hydrogenation of stearic acid to stearyl alcohol is reported. Comparing with other reported non-noble metal centers, such as Co and Ni, Fe is 3000 similar to 30000 times more abundant and 20 similar to 150 times cheaper, thus making our method more economic and attractive. The iron catalyst was prepared by simultaneous pyrolysis of iron precursor [Fe(acac)(3)] and nitrogen-doped carbon precursor (melamine) onto alumina, bearing Fe3C active phase and nitrogen-doped carbon-alumina hybrid support. The optimization of preparation parameter showed that the optimal pyrolysis temperature is 900 degrees C, while the best mass fraction of iron is 20%. The replacement of Fe(acac) 3 with Fe(NO3)(3) led to inferior catalytic performance, which was due to undesired redox reaction between NO3- and melamine during pyrolysis that hampered the reaction between Fe and melamine to form Fe3C active phase. Instead, hercynite phase became the predominant phase. The exploration of reaction parameter showed that the optimal reaction temperature is 320 degrees C and the best H2 pressure is 4 MPa. The time course for stearic acid conversion shows that stearic acid was rapidly converted into stearyl alcohol with yield of 88.6% within 0.5 h, and then gradually converted into octadecane with yield of 90% at 4 h. The unsatisfactory stability of the iron catalyst is probably due to the decomposition of Fe3C active phase to metallic Fe phase during recycling tests.

Selective Hydrogenation of Stearic Acid Using Mechanochemically Prepared Titania-Supported Pt and Pt–Re Bimetallic Catalysts

Highly Efficient Conversion of Oleic Acid to Heptadecane Without External Hydrogen Source over Atomic Layer Deposited Bimetallic NiPt Catalysts

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Highly Selective Production of Linear 1-Heptadecene from Stearic Acid over a Partially Reduced MoOx Catalyst

Water-mediated Promotion of the Catalytic Conversion of Oleic Acid to Produce an Alternative Fuel Using Pt/C Without a H2 Source

Hydrothermal decarboxylation and hydrogenation of fatty acids over Pt/C.

Selective Hydrogenation of Stearic Acid to 1-Octadecanol Using Bimetallic Palladium-Tin Supported on Carbon Catalysts at Mild Reaction Conditions

Selective Hydrogenation of Crotonaldehyde over Ir/TiO2 Catalysts: Unraveling the Metal-Support Interface Related Reaction Mechanism

Pt@Snox/Sio2 Catalysts with Enhanced Selectivity to Allyl Alcohol for Acrolein Hydrogenation

Iron-Catalyzed Selective Hydrogenation Of Stearic Acid To Stearyl Alcohol

Catalytic hydrogenation of stearic acid to 1-octadecanol using supported bimetallic Pd–Sn(3.0)/γ–Al2O3 catalyst

Ordered mesoporous zirconia microspheres and nanorod arrays for selective hydrogenation of stearic acid

Diastereoselective Hydrogenation of Tetrasubstituted Olefins using a Heterogeneous Pt‐Ni Alloy Catalyst

Enhancement of Pt Catalytic Activity in the Hydrogenation of Aldehydes

The Effect of Titania Polymorph on the Strong Metal-Support Interaction of Pd/TiO2 Catalysts and Their Application in the Liquid Phase Selective Hydrogenation of Long Chain Alkadienes

Catalytic deoxygenation of stearic acid into olefins over Pt catalysts supported on MOF-derived metal oxides

Efficient Hydrogenation of Stearic Acid over Carbon Coated Ni-Fe Catalyst

Zero-oxidation state precursor assisted fabrication of highly dispersed and stable Pt catalyst for chemoselective hydrogenation of α,β-unsaturated aldehydes

Fabrication of Biomass Derived Pt-Ni Bimetallic Catalyst and Its Selective Hydrogenation for 4-Nitrostyrene

Identifying Noble Metal Catalysts for the Hydrogenation and Dehydrogenation of Dibenzyltoluene: A Combined Theoretical-Experimental Study

Highly Selective Semihydrogenation via a Wettability-Regulated Mass Transfer Process