Abstract:Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Ahead of Print. Using 3-DOF model for the launch vehicle, the governing dynamic differential equations for the flight of intercontinental ballistic missiles (ICBMs) in a rotating Earth model has been employed to form the optimal control problem (OCP). Based on the Gauss pseudospectral method (GPM) for the OCP, the state and control variables are discretized using the Legendre-Gauss (LG) points in which the system dynamics is approximated on these LG points. Based on GPM, the linear quadratic regulator (LQR) controller for objective function of the OCP has been used for the state and control variables when the vacuum flight of the missile is constrained by a fixed terminal state-fixed terminal time condition. Then the objective function of OCP has been discretized in terms of state variables employing the Gauss differential approximation matrix. Using LQR based optimal control in conjunction with the GPM, input control variables are comprised to meet the terminal conditions of the system accordingly. In order to evaluate the performance and applicability of the present LQR based GPM optimal terminal states control in the exo-atmospheric flight of super heavy hypersonic ICBMs, the Titan II and RS-28 Sarmat are used as the launch vehicles. Numerical simulations for terminal errors are examined for the perturbed thrust and control problems. Numerical simulations reveal that the nonzero terminal errors are quite small in which the terminal accuracy of the solution can be regarded as acceptable. Moreover, it is concluded that the applied method effectively able to keep ICBM on to the desired terminal coordinates.

Determination of the minimum allowable parameters for the single-axis gyrostabilizer terminal control by direct simulation

Using a Method of Sequential Approximations of Uniaxial Gyrostabilizer Model to Solve the Nonlinear Terminal Control Problem

Control Parameters Optimization Based on Co-Simulation of a Mechatronic System for an UA-Based Two-Axis Inertially Stabilized Platform

Minimum Time Control of a Gantry Crane System with Rate Constraints

Robust Terminal Sliding Mode Control on SE(3) for Gough–Stewart Flight Simulator Motion Platform with Payload Uncertainty

An investigation on LQR based optimal terminal states control for exo-atmospheric flight of super heavy hypersonic intercontinental ballistic missiles using Gauss pseudospectral method

Nonsingular fast terminal sliding mode tracking control for underwater glider with actuator physical constraints

General inverse dynamic analysis of Gough-Stewart platform

Continuous Non-singular Fast Terminal Sliding Mode Control for an Active Gravity Field Simulator

Variable Structure Zoning Control of a Four-Axis Gyro Stabilized Platform

Hybrid Control Method for Large-angle Attitude Maneuver of Single-axis Air Bearing Table

Adaptive Terminal Sliding Mode Control for the Combined Spacecraft Takeover Control

Method of controllung the angular position of IO ASD relative to the system of coordinates of a gyrostabilized platform

Automatic Mass Balancing of a Spacecraft Three-Axis Simulator: Analysis and Experimentation

Stabilization of the attitude of a rigid spacecraft with external disturbances using finite-time control techniques

Two Parallel Single-Gimbal Control Moment Gyros Actuated Spacecraft Attitude Maneuver

Distributed fixed-time formation tracking control for multiple underactuated USVs with lumped uncertainties and input saturation

Global fast dynamic terminal sliding mode control for a quadrotor UAV

Predefined-time stabilization of stochastic nonlinear systems with application to UAVs

Terminal-Angle-Constrained Guidance based on Sliding Mode Control for UAV Soft Landing on Ground Vehicles

Fixed-time adaptive control of quadrotor suspension system with unknown payload mass