Abstract:Graphite has been extensively employed as commercial anode material in Li-ion batteries due to its high abundance, low cost, and negative electrode potential. Furthermore, it has demonstrated significant potential for use in K-ion batteries. However, distinct structural damage caused by the larger radius of K-ion (0.138 nm) compared to that of Li-ion (0.076 nm) leads to obvious capacity decay and unstable cycle life. It is crucial to improve the cycling stability of graphite in potassium ion batteries (PIBs). Herein, we design a stable interface of graphite anode by graphene coating with a simple and efficient microwave method. According to X-ray photoelectron spectroscopy (XPS), microwave reduction can effectively remove the oxygen group of graphene oxide (GO) within 10 s. The graphene coating can buffer the volume expansion of the graphite to suppress structural collapse; it can also accelerate electronic transmission to improve rate performance. As a result, the graphene-coating graphite anode, named GCG, exhibits super cycling stability with a capacity of 262 mAh center dot g(-1) after 3000 cycles at a current density of 0.2 A center dot g(-1), which means it can operate smoothly for one year. In contrast, at the same current density, graphite exhibits capacity fading to less than 150 mAh center dot g(-1) after 150 cycles. Moreover, compared to graphite, GCG demonstrates better rate performance achieving a capacity of 161.2 mAh center dot g(-1) at 500 mA center dot g(-1). Further electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) tests show that GCG exhibits faster electrical conductivity and ion diffusion compared to graphite. Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) images after cycling verify that the graphene buffer interface benefits the integrity of the electrode structure and improves the stability of the solid electrolyte interphase (SEI). Compared to graphite, the GCG anode exhibits better performance, as follows: 1) The graphene coating inhibits exfoliation of graphite during cycling, solving the problem of graphite anode' short cycling life, and 2) the graphene protective layer improves the ion diffusion rate, resulting in better rate performance of the GCG. In addition, this approach offers the advantages of simple operation and low cost, hopefully enabling large-scale applications of potassium-ion batteries.

Nitrogen and Fluorine Codoped Graphite Derived from Microcrystalline Graphite ore as a High-performance Anode Material for Potassium-Ion Batteries

One-Step Fabrication of Fluorine-Doped Graphite Derived from a Low-Grade Microcrystalline Graphite Ore for Potassium-Ion Batteries

Sandwich‐Like FeCl3@C As High‐Performance Anode Materials for Potassium‐Ion Batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Nitrogen-doped carbon nanosheet coated multilayer graphite as stabilized anode material of potassium-ion batteries with high performances

Polyvinylidene Fluoride-Derived Carbon-Confined Microcrystalline Graphite with Improved Cycling Life and Rate Performance for Potassium Ion Batteries

Boosting the Potassium Storage Performance of Carbon Anode Via Integration of Adsorption-Intercalation Hybrid Mechanisms

Highly Crystalline Graphite Nanofibers as Anode for High-Performance Potassium-Ion Batteries

Nitrogen and Fluorine Dual Doping of Soft Carbon Nanofibers as Advanced Anode for Potassium Ion Batteries

Nitrogen-Doping-Induced High-Performance Carbon Nanofiber Anodes for Potassium-Ion Storage

Activated carbon deriving from microcrystalline graphite ore as high-performance anode material for potassium-ion batteries

One-step fabrication of fluorine-doped graphite deriving from low-grade microcrystalline graphite ore for potassium ion batteries

Insight into a Nitrogen-Doping Mechanism in a Hard-Carbon-Microsphere Anode Material for the Long-Term Cycling of Potassium-Ion Batteries

High-throughput Fabrication of 3D N-doped Graphenic Framework Coupled with Fe3C@porous Graphite Carbon for Ultrastable Potassium Ion Storage

Graphitic Nanocarbon with Engineered Defects for High‐Performance Potassium‐Ion Battery Anodes

Nanopore Introduction in Graphite to Boost the Fast and Stable Potassium Storage

Advancements and Prospects of Graphite Anode for Potassium‐Ion Batteries

Stable Graphite Interface for Potassium Ion Battery Achieving Ultralong Cycling Performance

Control of the structure and composition of nitrogen-doped carbon nanofoams derived from CO2 foamed polyacrylonitrile as anodes for high-performance potassium-ion batteries

Freestanding CNT-modified graphitic carbon foam as a flexible anode for potassium ion batteries

Regulated adsorption-diffusion and enhanced charge transfer in expanded graphite cohered with N, B bridge-doping carbon patches to boost K-ion storage