Abstract:Interface engineering has become a critical process to fabricate efficient and stable planar heterojunction perovskite solar cells (PSCs), as the degradation of perovskite, hysteresis, and photo and thermal instability can all be triggered by the defective interfaces of PSCs. Herein, two fullerene derivatives, NMPPF and NMTTF, have been designed as interlayers between the MAPbI3 and TiO2 electron transport layer. The thiophene terminals of NMTTF have been found to effectively passivate the uncoordinated Pb2+ of perovskite, reducing trap density and charge recombination of PSCs as well as facilitating charge transport at the perovskite and TiO2 interface. Compared to the reference MAPbI3 PSC with a maximum power conversion efficiency (PCEmax) of 18.7% and serious hysteresis (ΔPCE = 7.2%), PSCs incorporating NMTTF achieve a PCEmax of 19.5% with minor hysteresis (ΔPCE = 1.2%) and outperform the performance of NMPPF (PCEmax = 18.0%, ΔPCE = 2.3%) and PC61BM (PCEmax = 18.9%, ΔPCE = 1.4%) modified PSCs. Unencapsulated PSCs adopting these NMPPF and NMTTF interlayers also exhibit good storage stability, maintaining 80% of their initial PCEs after storing in ambient for 30 days. This work demonstrates that the thiophene moiety can be an efficient defect passivation unit to design new fullerene molecules for interfacial engineering of PSCs with high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01491?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01491</a>.Synthesis of NMPPF/NMTTF fullerene molecules, PL and UV–vis spectra, dark J–V curves to calculate mobility and conductivity, EQE of PSCs without and with an NMPPF or NMTTF interlayer, water contact angle measurements, PCE evolution of unencapsulated PSCs in ambient condition, and Nyquist plots of PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01491/suppl_file/ae0c01491_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nanographene Coupled with Interfacial Pyrene Derivatives for Thermally Stable Perovskite Solar Cells

Well-Defined Thiolated Nanographene as Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Large-area perovskite solar cells employing spiro-Naph hole transport material

Ni nanobelts induced enhancement of hole transport and collection for high efficiency and ambient stable mesoscopic perovskite solar cells

Boosting Multiple Interfaces by Co-Doped Graphene Quantum Dots for High Efficiency and Durability Perovskite Solar Cells.

Double-Helicene-Based Hole-Transporter for Perovskite Solar Cells with 22% Efficiency and Operation Durability

Thermally stable inverted perovskite solar cells using an electropolymerized Zn-porphyrin film as a dopant-free hole-transporting layer

Enhanced Efficiency and Stability of n‐i‐p Perovskite Solar Cells by Incorporation of Fluorinated Graphene in the Spiro‐OMeTAD Hole Transport Layer

Stabilizing Perovskite Solar Cells Based on 2,2′,7,7′‐Tetrakis(N,N‐DI‐P‐Methoxyphenylamine)‐9,9′‐Spirobifluoren with Perfluoropolyethers

Quasi-Planar Core based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Enhancing perovskite solar cell performance: The role of polymer-assisted hole transport layers in hot carrier dynamics

Binary Hole Transport Layer Enables Stable Perovskite Solar Cells with PCE Exceeding 24%

Thiophene Terminated Fullerene Derivatives for Interfacial Modification toward High Efficiency MAPbI 3 Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Carbon Quantum Dot-Modified spiro-MeOTAD as a Composite Hole Transport Layer

Enhancing Thermal Stability of Perovskite Solar Cells through Thermal Transition and Thin Film Crystallization Engineering of Polymeric Hole Transport Layers

Undoped 2,2′,7,7′-tetrakis (N,N-p-dimethoxy-phenylamino)-9,9′-spirobifluorene and PbS binary hole-transporter for efficient and stable planar perovskite solar cells

Suppressing Glass‐transition and Lithium‐ions Migration in Hole Transport Layer by V2O5 Decorated Graphite Carbon Nitride Nanosheets for Thermally Stable Perovskite Solar Cells

Accelerating Thermal Transfer in Perovskite Films for High‐Efficiency and Stable Photovoltaics

Thermal Management Enables More Efficient and Stable Perovskite Solar Cells