Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

AN EXPERIMENTAL INVESTIGATION OF EFFECTS OF SURFACTANT TYPES ON THERMAL PERFORMANCE OF A HEAT PIPE CHARGED WITH SINGLE AND HYBRID NANOFLUIDS INCLUDING Fe AND ZnO NANOPARTICLES

An Experimental Investigation on Aqueous Fe–CuO Hybrid Nanofluid Usage in a Plain Heat Pipe

Distilled Water-Based AlN + ZnO Binary Hybrid Nanofluid Utilization in a Heat Pipe and Investigation of Its Effects on Performance

EXPERIMENTAL STUDY ON IMPROVING HEAT TRANSFER ABILITY OF A HEAT PIPE UTILIZING IRON OXIDE-FERRIC OXIDE HYBRID AND NICKEL FERRITE MONO-MAGNETIC NANOFLUIDS

Nanofluids for Thermal Transport

Experimental Investigation to Elucidate the Temporal Effect of Nanofluids on the Thermal Performance of Heat Pipes

Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

Effect of Al2O3/water nanofluid on performance of parallel flow heat exchangers

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Experimental investigation of a novel heat exchanger for optimizing heat transfer performance using Al2O3-water nanofluids

Experimental investigation for heat transfer performance of CuO-water nanofluid in a double pipe heat exchanger

Experimental study on flow boiling heat transfer augmentation of novel zinc oxide coated copper hybrid nanofluids

Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-and-Tube Heat Exchanger

Effect of using a ZnO-TiO2/water hybrid nanofluid on heat transfer performance and pressure drop in a flat tube with louvered finned heat exchanger

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

Enhancement of thermal performance of a wickless gravity heat pipe with hybrid nanofluid including graphene and MgO nanoparticles: an experimental study

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids

Molecular dynamics simulation of thermal behavior of nanofluid flow in a nanochannel with Cetryltrimethylammoniu Bromide surfactant molecules