Abstract:Unmanned aerial vehicles (UAVs) are at the forefront of this century's technological shift, becoming ubiquitous in research and market areas. However, as a UAV navigates autonomously, there are unanticipated occasions, e.g., collisions with dynamic obstacles or loss of data provided by the global navigation satellite system (GNSS), where the aircraft has to change its mission plans. In particular, to be protected from possible accidents, the platform's geofence protection system should adjust the trajectory appropriately when obstacles are detected and select the proper ground surface when emergency landing is prompted. As these processes require fast reaction times, utilizing low latency sensors and algorithms is necessary. This article proposes a complete and low-complexity geofence protection system for recognizing moving objects and assessing the ground surface's suitability using onboard sensing and processing modules. The proposed system is implemented on a novel fixed-wing UAV, designated as MPU RX-4, which features an unconventional flying wing layout and vertical take-off and landing (VTOL) capabilities. Our system is based on a forward-facing laser imaging, detection, and ranging (LIDAR) sensor and three downward-facing laser rangefinders. We take advantage of the high-precision distance measurements and operational speed to identify moving obstacles using the LIDAR module, while the ground's slope and the existence of any obstacle therein are computed through the rangefinders. First, the article describes the UAV design procedure and its aerodynamic performance characteristics, which allowed us to evaluate our approach on a testbed aircraft. Then, the evaluation protocol shows that our system can perform robustly and under real-time constraints reaching an overall latency of only 165.5 ms, sufficient for reliable detection and avoidance of moving obstacles.

Hostile UAV Detection and Neutralization Using a UAV System

Investigation of UAV Detection by Different Solid-State Marine Radars

Design of UAV detection system utilizing communication monitoring

Drone detection, recognition, and assistance system for counter-UAV with VIS, radar, and radio sensors

Multimodal UAV detection: study of various intrusion scenarios

Design and Realization of a Small UAV Ground-to-Air Tracking and Surveillance System

A Survey on Detection, Tracking, and Classification of Aerial Threats using Radars and Communications Systems

Development of UAV Tracing and Coordinate Detection Method Using a Dual-Axis Rotary Platform for an Anti-UAV System

Design of Autonomous Bolt Detection System Based on Quadrotor UAV

Radar Countermeasures for Unmanned Aerial Vehicles

Detection and Identification of Non-cooperative UAV Using a COTS Mmwave Radar

Dynamic Radar Networks of UAVs

Methods for detection-recognition of radar, acoustic, optical and infrared signals of unmanned aerial vehicles

mmHawkeye: Passive UAV Detection with a COTS mmWave Radar

Defending against Intrusion of Malicious UAVs with Networked UAV Defense Swarms

A Survey on Detection, Classification, and Tracking of Aerial Threats using Radar and Communications Systems

Distinguishing Drones from Birds in a UAV Searching Laser Scanner Based on Echo Depolarization Measurement

The MPU RX-4 Project: Design, Electronics, and Software Development of a Geofence Protection System for a Fixed-Wing VTOL UAV

Proposed method for building an anti-drone system for the protection of facilities important for state security

Micro-Doppler-Coded Drone Identification

Micro-UAV Detection with a Low-Grazing Angle Millimeter Wave Radar