Abstract:The poor electrochemical performance and potential safety hazards caused by lithium dendrites have severely restricted the practical application of Li metal anodes, although they are one of the most promising anode candidates for future high-energy-density Li batteries. One key point for inhibiting Li dendrites is to optimize the uniform and stable interface between the electrode and electrolyte for homogeneous electric field distribution. Here, the composite Li metal anode consisting of the top three-dimensional (3D) surface layer, the middle aphroid layer, and the bottom metallic Li is fabricated by the rolling method. The 3D surface layer and composite aphroid layer based on lithiophilic Ag-decorated carbon fibers enhance the uniformity and stability of the interface between the electrode and electrolyte and facilitate fast ion diffusion and electron transfer, which promote stable nondendritic Li deposition. The composite Li anode exhibits a low overpotential of only ∼20 mV after cycling for over 400 h at 1 mA cm–2. When paired with LiCoO2, the full cell delivers excellent cycling performance of 500 cycles at 2C with a capacity retention of over 84%. The design of the 3D structure layer provides references for the industrial application of Li metals modified by low-cost raw materials and simple methods.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c01399?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c01399</a>.The scanning electron microscopy images of the commercial degreasing cotton, the photographs of the pristine cotton, as-prepared CFs, the cotton impregnated with the Ag solution (Ag-cotton), as-prepared Ag-CFs, and as-prepared Ag solution, the TGA curve of the Ag-CFs, the XRD patterns, Raman spectra, TGA curve, and FESEM images at different magnifications and corresponding EDS mapping of m-Ag-CFs, voltage–time profiles of Ag-CFs/Li and m-Ag-CFs/Li in symmetric cells with an ether-based electrolyte at 1.0 mA cm–2 and a capacity of 1.0 mAh cm–2, the surface FESEM images of bare Li and Ag-CFs/Li composite anodes after cycling for 500 h, and voltage–time profiles and rate capabilities of Ag-CFs/Li, CFs/Li, and bare Li in symmetric cells with a carbonate electrolyte (1 M LiPF6 in 1:1 v/v EC/DEC) (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c01399/suppl_file/ae1c01399_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Biomass-derived carbon fibers modified by Ag/rGO for high-performance Li metal composite anode

Tuning Lithiophilicity and Stability of 3D Conductive Scaffold via Covalent Ag‐S Bond for High‐Performance Lithium Metal Anode

Lithiophilic N-doped carbon bowls induced Li deposition in layered graphene film for advanced lithium metal batteries

Rolling Press of Lithium with Carbon for High-Performance Anodes

Boosting Li‐Metal Anode Performance with Lithiophilic Li–Zn Seeds in a 2D Reduced Graphene Oxide Scaffold

2D Microporous Polymers/Reduced Graphene Oxide with Built‐In Lithiophilic Sites for Uniform Lithium Deposition in Lithium Metal Anode

Porous Co3O4 nanofibers surface-modified by reduced graphene oxide as a durable, high-rate anode for lithium ion battery

Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries

Preparation and electrochemical performance of ultra-thin reduced graphene oxide/lithium metal composite foils

Integrated Reduced Graphene Oxide Multilayer/Li Composite Anode for Rechargeable Lithium Metal Batteries

A general method of fabricating flexible spinel-type oxide/reduced graphene oxide nanocomposite aerogels as advanced anodes for lithium-ion batteries.

Composite Nanofibers Through In-Situ Reduction with Abundant Active Sites As Flexible and Stable Anode for Lithium Ion Batteries

In-situ Generated Li3N/Li-Al Alloy in Reduced Graphene Oxide Framework Optimizing Ultra-Thin Lithium Metal Electrode for Solid-State Batteries

A Three-Dimensional Surface Layer and a Composite Aphroid Layer Constructed by a Facile Rolling Method for High-Performance Li Metal Anodes

Stabilized Li metal anode with robust C-Li3N interphase for high energy density batteries

A dendrite-free composite Li anode assisted by Ag nanoparticles in wood-derived carbon frame.

Surfactant-assisted synthesis of a Co3O4/reduced graphene oxide composite as a superior anode material for Li-ion batteries

Hierarchical Fe3o4 Microsphere/Reduced Graphene Oxide Composites As A Capable Anode for Lithium-Ion Batteries with Remarkable Cycling Performance

A Facile Synthetic Approach to Reduced Graphene Oxide–Fe3O4 Composite As High Performance Anode for Lithium-ion Batteries

Metal Oxide Wrapped by Reduced Graphene Oxide Nanocomposites as Anode Materials for Lithium-Ion Batteries

Construction of Sandwich‐Like R‐fe3o4/rgo@cn Anode Materials As Conductive Agent‐Free Anode for Lithium‐Ion Batteries